¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: HRD and RIG control #software


 

¿ªÔÆÌåÓý

I have a dipole antenna in the attic. I had the same problems on a few bands, but not all. I added a 1:1 choke balun in the feedline and it removed the problem for me.

It sounds like RF is not getting back into the shack, and a choke balun placed at the antenna will fix that.

73,

--Hank

KB4MTO / TA5ZC


---
?


On 2022-04-25 08:17, Easwaran Unni Tharakkal VU2TE wrote:

Hai
After a maintanance on my antenna when I connect HRD to my Laptop I face this problem on 10 MTS Only

The software gets disconnect when I tune the ntenna with my LDG AT-1000 Pro autotuner. This happens only on 10 mts. SWR is well below 1:1.5

I tried my best to locate the problem but could not succed.? Is it a RF leakage if so what can be dome I tried few ferrite beeds along all the doubted cables but of no use
My antenna set up is Inv V with l600 ohms adder line feeder connected to 6:1 Balun and then to CMC balun and to rig

What can be the reason ? what is the remady ?

73s and best regards

VU2TE

Unni

Join [email protected] to automatically receive all group messages.