Mike,
I had a similar requirement with my K3, and the VA2FSQ
Win4K3Suite software solved that problem for me.? VA2FSQ sells a
similar port sharing package called Win4YaesuSuite, but
unfortunately it does not function with the FT-857D.?? My FT-857D
is currently sitting on the shelf, and I would like to reactivate
it with a port sharing scheme similar to yours.? So, if you find a
solution please share it with this group.
73, Walt, AJ6T
On 1/3/2021 10:35 AM, Mike Rhodes
wrote:
toggle quoted message
Show quoted text
Ok, I am feeling incredibly dense
right now and strongly suspect (and hope) this is not as
difficult as I am making it.
A little background - which I am sure is adding to my confusion.
Primary rig is Flex 5000 which is configured using VSPMgr and
Ddutil. However, I just sent it out to get a few things repaired
and updated so my FT-857 is back on the operating desk.
Previously (several years ago) I was set up to read only the
frequency from the FT-857 to my logging program. That is easy
and I am at that point now (DXLabs Suite).
HOWEVER, I would like to configure SatPC32 with the 857 and try
to capture some SSTV from the ISS using MMSSTV. For the life of
me, I can't seem to figure out how to get CAT data to DXKeeper
and SatPC32 at the same time. I guess I could shut down DXLabs
Commander and use that port for SatPC32 but was hoping I could
"share" CAT info between programs, much like I do with my Flex
and Ddutil. Am I trying to do something that is impossible?
Any help will be greatly appreciated.
Thanks,
Mike / W8DN
