Back on line

Dennis Turk All Messages By This Member #4932 Hi guys Just to let you know the? old Turk is back on line with a new email service though my address says the same. Dennis -- Moderator
Grey Pilgrim All Messages By This Member #4933 开云体育 Welcome Back sir. ?Yes these blasted computers ?make a lot less sense then a mill or a lathe. ?my main PC died a week ago and I had to restore everything here on a Mac. ? toggle quoted message Show quoted text On May 31, 2020, at 10:37 AM, Dennis Turk <dennis.turk2@...> wrote: Hi guys Just to let you know the? old Turk is back on line with a new email service though my address says the same. Dennis -- Moderator
Dan Linscheid All Messages By This Member #4934 Glen and I were wondering yesterday if you were in the Bahamas or Hawaii or somewhere else having a blast !? ?:) Dan toggle quoted message Show quoted text On Sun, May 31, 2020 at 10:47 AM Grey Pilgrim <pilgrim23@...> wrote: Welcome Back sir.? Yes these blasted computers ?make a lot less sense then a mill or a lathe. ?my main PC died a week ago and I had to restore everything here on a Mac. ? On May 31, 2020, at 10:37 AM, Dennis Turk <dennis.turk2@...> wrote: Hi guys Just to let you know the? old Turk is back on line with a new email service though my address says the same. Dennis -- Moderator -- Dan & Jeanne Linscheid Salem, OR
Ralph All Messages By This Member #4935 开云体育 Dennis, Great to your email... I was starting to wonder. Cheers, Ralph Dennis Turk wrote: Hi guys Just to let you know the? old Turk is back on line with a new email service though my address says the same. Dennis -- Moderator -- PLEASE BE KIND TO YOUR EMAIL FRIENDS Before forwarding please remove all email addresses and use the BCC option to add your contacts. Failure to do so results in spam and email from people you don't know. THANK YOU
xxthunder_godxx #4936 Please remove me from the group .
Colin postle All Messages By This Member #4937 开云体育 Use the unsubscribe button! Get toggle quoted message Show quoted text From: [email protected] <[email protected]> on behalf of xxthunder_godxx <xxthundergodxx@...> Sent: Sunday, May 31, 2020 7:19:39 PM To: [email protected] <[email protected]> Subject: Re: [DaltonLathes] Back on line ? Please remove me from the group .
Rainer Zauritz All Messages By This Member #4938 Hi xxthundergodxx ? Please remove me from the group ..... ? You con do it by yourself. ? Use the? UNSUBSCRIBE - "Button" ? Regards --? Rainer ? ? Gesendet:?Sonntag, 31. Mai 2020 um 20:19 Uhr Von:?"xxthunder_godxx" <xxthundergodxx@...> An:[email protected] Betreff:?Re: [DaltonLathes] Back on line Please remove me from the group .
Dennis Turk All Messages By This Member #4939 Hi Ralph Say you still got all your Dalton stuff?? Was wondering when your going to sell me the lever collet closer you loaned me one time.? My poor lathe looks so lonely with its closer missing? You ever get back to the NAMNs show again?? One of the board members Karl Gross has become very good friends with the Ratshooter and me and as he has a son that has a business here in Oregon he and his wife Lucy come out each year and when they do we all get together for a good bull fest and lunch.? Karl is a very good model maker also as he just finished a very difficult model.? I'm still building models but no longer spending much time restoring machine tools.? Sold the business this last year and had to haul most of my restored ,machines I had on display back home.? Left some of them there in the front entry as the new owner like them though they still belong to me. I still own the building so just a slum lord now. Here are a couple of pictures of what I have been working on. Take care Ralph and hope you doinng ok with all the crap thats going on.? Dennis On Sunday, May 31, 2020, 11:42:30 AM PDT, Rainer Zauritz <r.zauritz@...> wrote: Hi xxthundergodxx ? Please remove me from the group ..... ? You con do it by yourself. ? Use the? UNSUBSCRIBE - "Button" ? Regards --? Rainer ? ? Gesendet:?Sonntag, 31. Mai 2020 um 20:19 Uhr Von:?"xxthunder_godxx" <xxthundergodxx@...> An:[email protected] Betreff:?Re: [DaltonLathes] Back on line Please remove me from the group . -- Moderator
glenn brooks All Messages By This Member #4941 开云体育 I think you Have to unsubscribe, by clicking the link on the bottom of the email? toggle quoted message Show quoted text On May 31, 2020, at 11:42 AM, Rainer Zauritz <r.zauritz@...> wrote: ? Hi xxthundergodxx ? Please remove me from the group ..... ? You con do it by yourself. ? Use the? UNSUBSCRIBE - "Button" ? Regards --? Rainer ? ? Gesendet:?Sonntag, 31. Mai 2020 um 20:19 Uhr Von:?"xxthunder_godxx" <xxthundergodxx@...> An:[email protected] Betreff:?Re: [DaltonLathes] Back on line Please remove me from the group .
pling All Messages By This Member #4944 开云体育 Hello Dennis, At one time you were making and selling thread dials.? If you have some in stock or plan on making more please let me know how much one would be. Thanks, Peter Inglis Loudon, TN On 5/31/2020 1:37 PM, Dennis Turk wrote: toggle quoted message Show quoted text Hi guys Just to let you know the? old Turk is back on line with a new email service though my address says the same. Dennis -- Moderator
Daniel Lane All Messages By This Member #4945 I think it is the Great Turk, no the old Turk :D? toggle quoted message Show quoted text On Thu, Jun 4, 2020 at 4:06 PM pling <pinglis74@...> wrote: Hello Dennis, At one time you were making and selling thread dials.? If you have some in stock or plan on making more please let me know how much one would be. Thanks, Peter Inglis Loudon, TN On 5/31/2020 1:37 PM, Dennis Turk wrote: Hi guys Just to let you know the? old Turk is back on line with a new email service though my address says the same. Dennis -- Moderator
Grey Pilgrim All Messages By This Member #4946 开云体育 When I hear “The Turk” I think of the famous chess playing Automaton? toggle quoted message Show quoted text On Jun 4, 2020, at 1:07 PM, Daniel Lane <thud72@...> wrote: I think it is the Great Turk, no the old Turk :D? On Thu, Jun 4, 2020 at 4:06 PM pling <pinglis74@...> wrote: Hello Dennis, At one time you were making and selling thread dials.? If you have some in stock or plan on making more please let me know how much one would be. Thanks, Peter Inglis Loudon, TN On 5/31/2020 1:37 PM, Dennis Turk wrote: Hi guys Just to let you know the? old Turk is back on line with a new email service though my address says the same. Dennis -- Moderator
Dennis Turk All Messages By This Member #4947 Hi Pete No thread dials and no plans on making more.? I do have dial gears for the lot 3 4 and 5 lathes as well as a set of drawings.? Let ,me know? if interested in making your own.? Dennis On Thursday, June 4, 2020, 01:22:34 PM PDT, Daniel Lane <thud72@...> wrote: I think it is the Great Turk, no the old Turk :D? toggle quoted message Show quoted text On Thu, Jun 4, 2020 at 4:06 PM pling <pinglis74@...> wrote: Hello Dennis, At one time you were making and selling thread dials.? If you have some in stock or plan on making more please let me know how much one would be. Thanks, Peter Inglis Loudon, TN On 5/31/2020 1:37 PM, Dennis Turk wrote: Hi guys Just to let you know the? old Turk is back on line with a new email service though my address says the same. Dennis -- Moderator -- Moderator
pling All Messages By This Member #4949 开云体育 Hi Dennis, Thanks for the quick reply.? I would like to making my own and the only part I can't make right now is the gear.? Let me know what the dial gear and drawings would cost and how to pay you for them. Thanks, Peter Inglis On 6/4/2020 10:08 PM, Dennis Turk wrote: toggle quoted message Show quoted text Hi Pete No thread dials and no plans on making more.? I do have dial gears for the lot 3 4 and 5 lathes as well as a set of drawings.? Let ,me know? if interested in making your own.? Dennis On Thursday, June 4, 2020, 01:22:34 PM PDT, Daniel Lane <thud72@...> wrote: I think it is the Great Turk, no the old Turk :D? On Thu, Jun 4, 2020 at 4:06 PM pling <pinglis74@...> wrote: Hello Dennis, At one time you were making and selling thread dials.? If you have some in stock or plan on making more please let me know how much one would be. Thanks, Peter Inglis Loudon, TN On 5/31/2020 1:37 PM, Dennis Turk wrote: Hi guys Just to let you know the? old Turk is back on line with a new email service though my address says the same. Dennis -- Moderator -- Moderator
Dennis Turk All Messages By This Member #4951 Hi Pete Send me your address in a personal email and I will send a gear and a set of drawings off to you.? My Drawings maybe down at my coast place and if so will have to wait till the middle of the month to send them.? I get $25 for the gear and drawings and that also covers the postage. dennis.turk2@...?? On Friday, June 5, 2020, 08:13:14 AM PDT, pling <pinglis74@...> wrote: Hi Dennis, Thanks for the quick reply.? I would like to making my own and the only part I can't make right now is the gear.? Let me know what the dial gear and drawings would cost and how to pay you for them. Thanks, Peter Inglis On 6/4/2020 10:08 PM, Dennis Turk wrote: Hi Pete No thread dials and no plans on making more.? I do have dial gears for the lot 3 4 and 5 lathes as well as a set of drawings.? Let ,me know? if interested in making your own.? Dennis On Thursday, June 4, 2020, 01:22:34 PM PDT, Daniel Lane <thud72@...> wrote: I think it is the Great Turk, no the old Turk :D? On Thu, Jun 4, 2020 at 4:06 PM pling <pinglis74@...> wrote: Hello Dennis, At one time you were making and selling thread dials.? If you have some in stock or plan on making more please let me know how much one would be. Thanks, Peter Inglis Loudon, TN On 5/31/2020 1:37 PM, Dennis Turk wrote: Hi guys Just to let you know the? old Turk is back on line with a new email service though my address says the same. Dennis -- Moderator -- Moderator -- Moderator

Previous Topic Next Topic