开云体育

Pretty much what I found. It could be the thread on the cone is bottomed out. I will take pix when next I remove the apron in a week or so.Must clear a space to work firstLarry

Thanks Dennis, the "threadless nuts" are working good so OK for now. I wanted to see what kind of work the old Combination machine would do so I put a 3" slab mill on it. The old girl did a nice job.

OK Larry lets see if I can explain this apron? gear box.? The cone clutch rides on two pins that are pressed into the worm gear.? The inside of the cone has a thread and when you rotate the handle

Well, then, I have a problem.? When fully engaged the carriage does not move under power but does by hand. the assembly seems to be bottomed out as it cannot be disengaged by hand.? there was no

Hi Larry OK yes your Lot 5 has power longitudinal feed via the keyway in the lead screw that drives the worm? that drives the worm gear that houses the cone clutch.? The knob on the front of the

Hi Dan OK to the age of your Lot 4 Dalton the end door tells me it was built after 1922 as that is when Dalton started using that door on the Lot 5 lathe that came out that year.? Check your patent

Greetings I removed? the lead screw from my lot 5 today for a good cleaning and , while I was at it, the apron as well. After removing 100 yrs of gunk I found................ no wear to speak of! no

Sorry I did not mean to? highjack your post about the base for sale.? Just though a bit of info was in order and as usual I get all carried away..? Like to talk to much I guess. Dennis

For those of you that are not familiar with the Dalton lever operated collet closer the lathe had to be ordered with it when purchased new.? The arm you see extending back from the end gear door is

In looking through all my Dalton literature I find that the base your offering was not offered for the Lot 2 lathe but came out in 1914 for the Lot 4 lathe.? You? base is a foot powered pedestal

Is anyone interested in making an offer on a cast iron base for a Lot 2 lathe? I’m happy to ship it at cost but it’s definitely a pallet job! Very heavy obviously. I’ve got a Lot 2 but no room

Greetings,? price $1400. obo,? located Cleve. Oh

----- Forwarded Message ----- From: norman cangey <clockcangey61@...>To: Dan Lins <linscheid.dan@...>Sent: Sunday, January 3, 2021, 7:35:20 PM ESTSubject: lathe Pics of lathe

I saw the pics: The true beauty of Industrial Design. thank you

Were the pics of lathe rec'd by the group?? A member asked for pics.?? Norm Cangey?????? Thank You

John Send me an e-mail as I am also is southeastern CT so we can get off this thread ronaldpeeler@... ________________________________ Sent: Wednesday, January 6, 2021 10:38 AM To:

I think 2 threads are confused here. I am Guy Gloor, I was not the one who asked if you were in CT. I am the person with Lot 2 No. 5. Guy Sent: Wednesday, January 6, 2021 10:33 AM To:

Hey Guy, Your email comes up as 'Ron Peeler'. You go by Guy then? JH

Yes Ron, I'm in southeastern CT.

Not sure why the text was shown two times as I only sent it one time with the pictures.? DAN help:-)? Dennis