开云体育

Thanks for the info on the tool post from Amazon, did you have to do any mods for this or is it just a bolt on and go? Thanks Craig

Thanks for the input I’m going to get one of those tool posts And I have #37!!!!!

Also note there is a spacer under the tool post on the Lot 5. You should not need this on your Lot 2.

Lot 2 lathes were built in 1913 and are six inch swing lathes where later lathes in this series were 7 1/4 swing. As to parts I have a few Lot 2 parts left from two parts lathes I have.. As to a tool

This is what I

Hello, I just came across a lot 2 Dalton lathe and want to add a tool post to this. I am looking for some feedback on what others have done. I’m also interested in a 4” Chuck for this. Does

All The lathe has gone to a young man who restores motorcycles. His intent is t restore the lathe … I’ll be sending him a link to join this group. Thanks for all the help over the years,

Drop me a line to my email … we’ll work it out! John Rosberg

Hi John, Yes, still very much interested. If it attaches to the headstock, it will have the correct size backing plate - which is key to using it. Glenn Cell: 206.790.8711

Glenn Still interested in a chuck? John Rosberg

Lot 4/256 --? Rainer?

Serial? Its on the end of the Ways….

Hey Dennis. Hope all is well my mentor…. Btw…did I ever tell you: thanks? THANK YOU SIR. You taught me, and my son…. I am only 70 but doing well..

I am also in the Chicago area suburbs and will be happy to take it. My own Dalton 6 has some broken components and I love the idea of using another Dalton to make the parts to fix it. Then I can pass

[image] It’s mostly packed away so random motorcycle parts don’t fall on the poor dear. John Rosberg

Hi, I'm in La Grange.? I'd love to pick up your lathe. I'm in Cleveland until Sunday. Thanks, Ralph?? 708-280-2560 john rosberg wrote: -- PLEASE BE KIND TO YOUR EMAIL FRIENDS Before forwarding

John, I’m in the western Chicago suburbs. I have a 9 inch. Any pictures of the lathe? Thanks, Laddie

Hi John There are 15 change gears that go with the Dalton lathes. 'starting with a 24 and the biggest is a 96. Let's see how good my memory is. 24 30 32 36 40 44 46 48 52 54 56 60 66 72 96. Should

Glenn Neither chuck has a dalton logo or brand on it … one has this stamped on the face [IMG_8490] John Rosberg

John, Could I buy one of your 3 jaw chucks, with backplate? Please, please?? My chuck is original and completely worn( bell mouth jaws) out from 102 years use… All the dalton chucks were