On Nov 11, 2023, at 13:43, glenn brooks <brooks.glenn@...> wrote:

? Hi John,

Yes, still very much interested. If ?it attaches to the headstock, it will have the correct size backing plate - which is key to using it.?

Glenn?

Cell: 206.790.8711

On Nov 11, 2023, at 7:08 AM, john rosberg <john_rosberg@...> wrote:

? Glenn

Still interested in a chuck?

John Rosberg

On Nov 11, 2023, at 01:43, Rainer Zauritz <r.zauritz@...> wrote:

?Lot 4/256

--?
Rainer?

Gesendet: Samstag, den 11.11.2023 um 05:19 Uhr

Von: "Grey Pilgrim" <pilgrim23@...>

An: DaltonLathes@groups.io

Betreff: Re: [DaltonLathes] Lot 4 lathe and tooling … free

Serial? ?Its on the end of the Ways….

On Nov 10, 2023, at 2:34 PM, john rosberg <john_rosberg@...> wrote:

<image.png>

It’s mostly packed away so random motorcycle parts don’t fall on the poor dear.

John Rosberg

On Nov 10, 2023, at 16:23, Dennis Turk <dennisturk448@...> wrote:

?

Hi John

There are 15 change gears that go with the Dalton lathes. ?'starting with a 24 and the biggest is a 96. ?Let's see how good my memory is. ?24 30 32 36 40 44 46 48 52 54 56 60 66 72 96. ?Should be two 24 so I may have one listerd that is not correct. ?Ha not bad for an old 82 year old. ?Pictures are always nice to see John.

Dennis

On Fri, Nov 10, 2023 at 12:48?PM john rosberg <john_rosberg@... <mailto:john_rosberg@...>> wrote:

Lot 4, no. 256. Two three jaw chucks, a lantern tool holder and what is likely a shop made tool holder (by the previous owner). I believe all the change gears are here, as well and a collet closer (twist to close).

The lathe was given to me, so I’m passing it along the same way.

Pickup from the northern Chicago suburbs.

John Rosberg