开云体育

Bill Holcome I found the part for your compound slide as soon as you send me your address I will send it to you. :)

All,If anyone is looking for short (<24") x 1" wide leather flat belts, I have a friend who makes the belts for my Type 4. I don't see why a couple couldn't be joined together for longer lengths.

Some pictures of my

Hi To use the back gears there is a pin behind the chuck that locks the drive belt assembly to the front gear. Pull this pin out then you can use the back gears that’s identical system to mine. I

Well I managed to finish connecting and somewhat tensioning things.? I haven't bolted the lathe onto the table yet, but that will be coming.? With the simple 36 inch automotive belt I picked up, I

No you don't. I am cheap and lazy. So I went to my local auto repair shop and asked for an old timing belt. I cut it to length and spliced it back together. The picture shows a splice with

So I don't need to get a flat leather belt?

I use an automotive serpentine flat belt. 6rib maybe?? Can’t remember the name of the belt series, but they work perfectly. Glenn Brooks

Scotch Brite and elbow grease :)

Getting the dalton figured out and all.? GE motor will need a new capacitor bit that is for another time.? Will need to repaint this baby eventually, rustoleum enamel works well for me on GE fan

What I did was hang my intermediate on the wall above lathe as to save space. Works perfect

OOPS!!!!!! sorry about that. my cut paste fowled up it SHOULD have been this link: https://www.youtube.com/watch?v=VgeFbK7D_hc&t=32s

that link takes me to : A PRIMER FOR ERISIAN EVANGELISTS

not sure why the last one did not go thru Anyway try again. Not “overhead” but I thought a video of how I did similar might be instructive or at least, humorous

Well….the time is about 230ish on a Sunday and my interwebs connection runs at a slow creep. I would say ignore this till around 4. Anyway, I do not use an overhead system for my lathe but, I

Mine is overhead and bought it this way back in the 1970's but planning on changing it sometime LOL Terry On Sunday, April 5, 2020, 10:18:10 AM EDT, Bill Holcombe <yoemen66@...> wrote:

That's on my list.? I would be interested as wellLarry

Anyone have a diagram or drawing illustrating how to setup an overhead drive?

Hello Rob, wondering if you ever resolved your slipping clutch? my lot 5 has the same issue. Although it does engage, it is very sloppy and I can foresee a time when it just does not work

thanks! taking notes. Halogen numb glass. I like it! sneaky!