Here are a pair of photos of what I got.
Dan
-------- Original message --------
Date: 7/29/24 4:56 PM (GMT-05:00)
Subject: Re: [DaltonLathes] New lathe
Dennis:? I have the change gears you gave me.? I have never used them in
that one part on my lathe I could never get right was the Banjo.
Dan (if its alright with you Dennis)? I cna pass on this set.? -Bart
PS I also have a more modern Grizzly (is there ever such a thing as just
ONE LATHE?)? and its change gears work like a dream.
Mostly I use my Dalton as a erzat Rifling jig.
On 7/29/24 1:04 PM, Dennis Turk via wrote:
> Hi Dan
> Dalton hever had a manual or at least any that we have ever found.? Your
> best bet is South Bend lathe's how to run a lathe and also the Atlas
> operation manual.? Both are very revallent to the Dalton lathe design.
> As to gears for threading and different speeds for power feeding they
> are hard to come by.? Unless anyone?in the group has some extras
> you?will not find any on the internet.? The gears are 14 1/2
> degree?pressure?angle and diametral?pitch is 20. Let us know the serial
> number and also the Lot number.? PIctures are always welcome. Some of
> the guys have?had luck making gears by 3D printing ones they needed.?
>? ?Also let us know what?gears you do have.? There are 15 gears in the
> Dalton set of change gears.
> Dennis
>
> On Mon, Jul 29, 2024 at 11:37?AM Dan Hrinko via
> <> <danhrinko=
[email protected] > <mailto:
[email protected]>> wrote:
>
>???? I have just obtained a Dalton Six Type B-4.? I am a complete newbie
>???? to machine work but want to learn.? I am seeking information about
>???? instruction manuals, sources of extra gears for the power feed
>???? attachment, and suggestions for a basic ¡®how to¡¯ text for operating
>???? lathes for making small parts.____
>
>???? __ __
>
>???? Dan Hrinko____
>
>
Dennis Turk
