Re: Chuck options
开云体育Hi Ryan ? Is? your current chuck a direct mount or does it have a mounting back plate?? Also the standard size three jaw chuck for a Lot 3 4 and 5 was four inches.? The standard offered 4 jaw was a five inch.? There are a number of fairly good quality 4 inch three jaw chucks available on a number of eBay sites.? As to new mounting back plates there are none to be had so you have to make them.? I have made new back plates for a Dalton? Lot 3 4 and 5 using a 1 inch 10 back plate meant for a small Atlas or Craftsman lathe. ?These usually have sufficient material around the spindle thread that allow you to open them up to Dalton size of 1 ? - 12. ? Dennis ? From: [email protected]
[mailto:[email protected]] On Behalf Of Ryan Bardsley
Sent: Saturday, March 5, 2022 3:26 PM To: [email protected] Subject: [DaltonLathes] Chuck options ? Hello, guys. I am reaching out to see if anyone has managed to come up with a good solution for replacing the chuck on their Dalton Lot 5. The chuck that came with my lathe was in pretty?bad shape and really seems to be where a lot of my eccentricity is coming from. Is there a modern option that I could throw money at to bring things up to modern accuracy standards? Any tips or techniques for truing the original one? I don't see any sort of truing options.? ? Many thanks! ? Ryan Manchester, MA |
Dennis Turk