Hi Dennis, I did some measuring the spindle is 1-7/8” and the lead screw is 1” with 8 threads per inch. The gib is 0.525” wide and 6-7/8” long. I would be interested in having an original style compound made if possible but also if that’s not possible I would like to make it work however that may be. There was only two change gears a 56 tooth and a 72 tooth I forgot to measure the width and bore though. There are a couple of parts that came in a box that I’m not sure if they belong to the lathe or not, they don’t seem familiar. Attached some pictures of the lead screw with gears and a picture of the mystery parts?
thanks
Gareth?
