开云体育

Re: A Dalton lathe in Italy


 

开云体育

Wonderful to see these lathes continue to turn up. ?A pre 1915 lathe suggests it saw service in the Great War. ?Dennis May know more...

The black is almost certainly Japanning. ?Jappening in the context of early early day 1915 ?lathes was a mixture of linseed oil, small amount of kerosene as a solvent, and Asphaltium. ?Asphaltium is a mineral mined in those days in a few locations in the Western US. When mixed with kerosene and lindseed oil is was reduced by heating to a liquid then painted or sprayed on the surface and baked in an oven at just under 400* F. ?Repeat three times to build up the surface thickness, and you have a crystaline, non porous surface where the mineral content interlocks to seal against water intrusion. Hence a very effective rust inhibitor.

Widely used for machine tool coatings and latter by Henry ford as an undercoater in his early day automobile factories.

Glenn?



On Jan 27, 2022, at 2:55 PM, Dria72 via <andre.par@...> wrote:

Well, I actually found at least three/four layers of different paint when started to disassemble and clean the lathe.
The first layer is black (japanning ? ) , then there is a thick layer of brown, than a light grey and at last the green.

Scraping the change gear cover I found maybe the model of the lathe, the brass plate reports a generic seven inches lathe but there is actually another write hidden underside that claims TYPE B-4 (see picture for a better understanding).

As you can see from the pictures, the tail stock is missing its back cover and the hand wheel as well so I guess should machining a new one.
Does anybody has a picture or drawing of the missing piece (with dimensions would be great) ? Is there any bearing?

Thanks,
ciao

Andrea
<IMG_20220122_124757.jpg>
<IMG_20220122_125335.jpg>
<IMG_20220122_130011.jpg>

Join [email protected] to automatically receive all group messages.