开云体育

On Fri, Feb 21, 2025, 5:44?AM Pete B via <pete.basel=[email protected]> wrote:

Which mids are you getting?

These DQ20i s are at our house in Stamford CT and I had the drivers at our home in Trumbull where

my measurement equipment is.? The Trumbull home burnt down and most of the drivers are destroyed.

I have Large Advent woofers that will work and will probably buy the modern tweeter and have a modern

midrange in mind.

Pete Basel

On Fri, Feb 21, 2025 at 5:46?AM Mickey McAuliff via <mickeymcauliff=[email protected]> wrote:

Pete. Thanks for your reply. Madisound squared me away on polarity.? I have so far replaced the woofer and tweeter and ordered mids from Josh at Madisound yesterday. I'm not so much of a purist when it comes to the DQ20'S...meaning everything doesn't have to be exactly the same. I'm a lover of fantastic sound and also very in tune visually with the Dahlquist DQ20.? I think we may be Friends because of the Dahlquist.
Thanks again. Mick

On Thu, Feb 20, 2025, 4:19?PM Pete B via <pete.basel=[email protected]> wrote:

I recently purchased a very clean pair of DQ20i s and am in the process of restoring them.

Woofers were recently done by Miller Sound by PO.

And I'm carefully documenting them on Audio Karma, and correcting the schematic that is

available online.? Taking the red dot on the original tweeters as?+, yes the black/green wire goes to the?+

and the black/white goes to the -.

System documented here (not done):

Mids and edge hardening documented here:

Pete Basel

On Fri, Feb 14, 2025 at 7:26?PM Mickey McAuliff via <mickeymcauliff=[email protected]> wrote:

Fellas. Can you tell me the polarity of the Scanspeak tweeter. Black/white, green/black. Which is which? The back label is gone where I assumed the +/- was located. Got my new ones today and didn't want to fudge it up. Thanks Mick