¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: DQ-10 Impedance


 

¿ªÔÆÌåÓý

Samuel and Andy,

?

Attached are the system impedance, measured this morning, on two charts, one is highlighted at 60Hz and the other at 120Hz.? As expected there is one impedance rise at the woofer resonant frequency. ??Impedance minima is outside the reproduced arrange at 20Hz.? Overall, the system is nominally an 8 ohm impedance with phase angle between ¡À30¡ã.? IMHO and experience, aside from the efficiency issues, the DQ-10 is a rather easy load for any 8 ohm rated amplifier.

?

Ed

?

From: [email protected] <[email protected]> On Behalf Of Ed Lindsey
Sent: Sunday, September 20, 2020 10:38 PM
To: [email protected]
Subject: Re: [DahlquistSpeakers] DQ-10 Impedance

?

No problem.? You'll be able to see it clearly.

?

?

?

Sent from my Verizon, Samsung Galaxy smartphone

?

?

-------- Original message --------

From: Samuel Crider <dieseldude1@...>

Date: 9/20/20 10:18 PM (GMT-07:00)

Subject: Re: [DahlquistSpeakers] DQ-10 Impedance

?

Interesting! If possible Ed make a notation of what it is at 60hz and 120hz.

?

Thx,

DD

?

On Sun, Sep 20, 2020, 8:52 PM Ed Lindsey <sealindsey@...> wrote:

I'll measure and post the impedance tomorrow, after I measure it.? Because the woofer is a sealed design there will only one rise at bass resonance.

?

?

?

Sent from my Verizon, Samsung Galaxy smartphone

?

?

-------- Original message --------

From: Andy Heckl <andyheckl@...>

Date: 9/20/20 6:21 PM (GMT-07:00)

Subject: [DahlquistSpeakers] DQ-10 Impedance

?

I need some advice. The DQ-10 has a published nominal impedance of 8 Ohms. I understand this to be an average number.? Somewhere along the line, I¡¯ve picked up that the actual impedance of the DQ-10 varies greatly. Is this correct?? Can you share your knowledge of impedance measurements of a DQ-10 vs frequency?

I¡¯ve attached a stock example from an unknown speaker as an example of what I¡¯m looking for. Please excuse my finger scribbling the word ¡°example¡±.?

Join [email protected] to automatically receive all group messages.