Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Commander 8.0.5 No Freq - Up Date
|
Tom Roberts
Hello to all:
? My Commander 8.0.5.? LATEST UP GRADES..Stopped updating and passing FREQ info to DXKeeper ?automatically .. ? Have not operated since last up-grade until this weekend.. ? Commander will update freq from the XCVR ?Manually VIA the Arrow Buttons on Commander?or Band Spread Pre Sets?Buttons - However?will not update when the freq are changed via the XCVR VFO... ? XCVR is TS-2000 Kenwood..PC Spot on Kenwood screen OK.. ? ? It?has worked flawless for years - - wonderful program ? ? I have Reset Computer, Reset Commander Con-fig - verified my Comm settings - no change in operation status.. ? Any one have an idea? ? ? 73, to all.. |
|
What sort of transceiver are you using, Tom? If there's an external
toggle quoted message
Show quoted text
interface between your transceiver and your PC, how is this interface powered? If the power comes from a serial port modem control signal (like RTS or DTR), open the Ports tab of Commander's Config window and make sure that the signal being used as a power supply is set to "always on". 73, Dave, AA6YQ -----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of Tom Roberts Sent: Sunday, November 29, 2009 5:07 PM To: dxlab@... Subject: [dxlab] Commander 8.0.5 No Freq - Up Date Hello to all: ??? My Commander 8.0.5.??? LATEST UP GRADES..Stopped updating and passing FREQ info to DXKeeper ???automatically .. ??? Have not operated since last up-grade until this weekend.. ??? Commander will update freq from the XCVR ???Manually VIA the Arrow Buttons on Commander???or Band Spread Pre Sets???Buttons - However???will not update when the freq are changed via the XCVR VFO... ??? XCVR is TS-2000 Kenwood..PC Spot on Kenwood screen OK.. ??? ??? It???has worked flawless for years - - wonderful program ??? ??? I have Reset Computer, Reset Commander Con-fig - verified my Comm settings - no change in operation status.. ??? Any one have an idea? ??? ??? 73, to all.. ------------------------------------ Yahoo! Groups Links No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.339 / Virus Database: 270.14.74/2515 - Release Date: 11/29/09 07:49:00 |
|
michaelmorgan1
Tom,
toggle quoted message
Show quoted text
I have a Kenwood Ts-2000 and ran into a similiar situation a few weeks ago. It turned out that the freq don't update when the radio is in Memory mode. I had recently programmed in all the local repeaters and had it scan them in memory mode. While it is scanning it appears similiar to how yours does. I have the PC light but no updates until I put it back in VFO mode. Michael, AA5SH --- In dxlab@..., "Dave AA6YQ" <aa6yq@...> wrote:
|
|
Tom Roberts
Thank you again for your help Dave.
toggle quoted message
Show quoted text
? I verified the Comm Conn. they are all up dated to 32Bit. ? The Rig is a TS-2000 kenwood. ? Turned on HRD - it operated the Rig correctly with out issue. ? I would have to surmise I must have an internal switch turned off within DXKeeper. ? Have a suggestion? ? Thank You.. --- On Sun, 11/29/09, Tom Roberts <ac5rd@...> wrote:
From: Tom Roberts <ac5rd@...> Subject: [dxlab] Commander 8.0.5 No Freq - Up Date To: dxlab@... Date: Sunday, November 29, 2009, 3:06 PM ? Hello to all: ? My Commander 8.0.5.? LATEST UP GRADES..Stopped updating and passing FREQ info to DXKeeper ?automatically .. ? Have not operated since last up-grade until this weekend.. ? Commander will update freq from the XCVR ?Manually VIA the Arrow Buttons on Commander?or Band Spread Pre Sets?Buttons - However?will not update when the freq are changed via the XCVR VFO... ? XCVR is TS-2000 Kenwood..PC Spot on Kenwood screen OK.. ? ? It?has worked flawless for years - - wonderful program ? ? I have Reset Computer, Reset Commander Con-fig - verified my Comm settings - no change in operation status.. ? Any one have an idea? ? ? 73, to all.. [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] |
-----Original Message-----AA6YQ comments below From: dxlab@... [mailto:dxlab@...]On Behalf Of Tom Roberts Sent: Sunday, November 29, 2009 10:39 PM To: dxlab@... Subject: Re: [dxlab] Commander 8.0.5 No Freq - Up Date Thank you again for your help Dave. I verified the Comm Conn. they are all up dated to 32Bit. The Rig is a TS-2000 kenwood. Turned on HRD - it operated the Rig correctly with out issue. I would have to surmise I must have an internal switch turned off within DXKeeper. Have a suggestion? Yes; Kenwood transceivers require the serial port's RTS signal to be enabled; if this signal is not enabled, Commander can control the transceiver, but the transceiver will not send information to Commander. Please open the Config window's Ports tab, and in the "Serial Port" panel set RTS to "always on". 73,Better? Dave, AA6YQ |
|
Tom Roberts
THANK YOU DAVE ..That did the trick, sorry I missed that,, not certain how
toggle quoted message
Show quoted text
it became switched.. ? Once again Thank You Dave.. Happy Holidays.. 73s --- On Sun, 11/29/09, Dave AA6YQ <aa6yq@...> wrote:
From: Dave AA6YQ <aa6yq@...> Subject: RE: [dxlab] Commander 8.0.5 No Freq - Up Date To: dxlab@... Date: Sunday, November 29, 2009, 8:55 PM ? -----Original Message-----AA6YQ comments below From: dxlab@yahoogroups. com [mailto:dxlab@yahoogroups. com]On Behalf Of Tom Roberts Sent: Sunday, November 29, 2009 10:39 PM To: dxlab@yahoogroups. com Subject: Re: [dxlab] Commander 8.0.5 No Freq - Up Date Thank you again for your help Dave. I verified the Comm Conn. they are all up dated to 32Bit. The Rig is a TS-2000 kenwood. Turned on HRD - it operated the Rig correctly with out issue. I would have to surmise I must have an internal switch turned off within DXKeeper. Have a suggestion? Yes; Kenwood transceivers require the serial port's RTS signal to be enabled; if this signal is not enabled, Commander can control the transceiver, but the transceiver will not send information to Commander. Please open the Config window's Ports tab, and in the "Serial Port" panel set RTS to "always on". 73,Better? Dave, AA6YQ [Non-text portions of this message have been removed] |
to navigate to use esc to dismiss