开云体育

I would first directly email Volker, he is usually on this list but may be off programming! dl9ho@... <mailto:%20dl9ho@...> 73, Cliff K3LL From: dxlab@...

Hi Mark, You can print the envelopes again by clicking the Address Envelopes again. You can limit which envelopes by clicking the Clear All button and the checking only the ones you want to print.

If your log file is what you wish to access from elsewhere on your network, then 1. on the Log tab of DXKeeper's Config window, note the pathname of your Log file as shown in the panel at the top of

Yes that can be done but without Commander controlling the frequency and mode of your transceiver, and Winwarbler keying it I don't know what you would have to log. I suppose you could do things like

Finally got it going, but now SpotSpy is giving me TONS of "13 Type Mismatch" errors. Guess I'll have to try THAT mailing list for help. Thanks, Earl -- KD5XB -- Earl Needham Clovis, New

While printing envelopes for QSLs the printer hiccupped a few times and DXKeeper thinks it has printed envelopes that haven't actually been printed. I know DXK keeps track of what it has printed.

How about just reinstalling DXL into c:&#92;DXLab as suggested in http://www.dxlabsuite.com/dxlabwiki/RunningOnWin7 and http://www.dxlabsuite.com/dxlabwiki/RunningOnVista This would

Actually, you can simply move your log file to a shared folder, input the change in DXKeeper on the original machine, then install DXLabs on the "remote" machine and access your log file through your

Hi Dave, I have just uploaded an updated LoTW user list database, now it is at 05/12/2009. 73, Renzo I6KZR MITTO TIBI NAVEM PRORA

In the downloaded zip file there is either a readme file or a help file that describes setting it up. 73 Rick N2AMG

Rich - W3ZJ wrote: Rich, Thanks for your comments. The main reason I want to move the DXLabs folder is that I

You should be able to access the DXLab files from another computer on your network just by shearing the "DXLab Suite" folder. However, keep in mind that no matter where the programs are located on

Rick, I was looking for the FLDIGI setup info on your site but I could only find the downloads. I think Dave's site mentions setup instructions for FLDIGI but his instructions are very general. Can

Hi Dave... I want to move the DXLabs folder from within the Program Files folder on my shack computer, so that I can access it from elsewhere on my network. Can you please give me a step by step? A

George.. Try adjusting the settings on the rigCat tab. It sounds like something is timing out before the radio initializes. Your other choice is to use radio control from Commander and let it send

Hey Andy, I didn't believe that changing the date in the computer would work, but it did!!. I changed the date to the day after the cert was issued in August of this year and it work FB. This system

Andy, Thanks. This cert is only three months old. I will try your trick and see what happens. George W2GS

I don't see a PTT diamond in the Rig Cat. I have the "CAT control for PTT" checked. The program works, but I get this error on startup. George W2GS

No, I just tried any upload and it accepted the password and uploaded the data. George W2GS

Do you get the same error when attempting to use the certificate to sign an upload? If so, contact LotW support at ARRL. There has been a problem of "false expirations" in some cases. 73,