开云体育

My current QSL cards have enough space that a 5 1/2 inch (width) label will fit, so I ordered labels of that size. At that size on 8/2 x 11 pages, you essentially have 1-column labels. Having not

+ AA6YQ comments below I have also gotten many of these. Some are nice cards, other's very generic with a "typewriter" font that's hard to read. I should just dump them but I have been answering

+ AA6YQ comments below I have also gotten many of these. Some are nice cards, other's very generic with a "typewriter" font that's hard to read. I should just dump them but I have been answering

+ AA6YQ comments below I've been playing with SpotCollector's Web Server, which I had working before I got my current home router, a TP-Link. I see the spots both on my computer and phone, but the

+ AA6YQ comments below yes its checked + If that's the case, then those 5 QSOs that were imported weren't identical to QSOs already present in your log. + Pick one of them, and compare it to the

+ AA6YQ comments below There is no Errorlog.txt anywhere in the DXLab folder. I can’t see how to create one, so assume it shows up when an error occurs. + Correct. I’ve also rebooted the

+ AA6YQ comments below This error just came up when starting DXK. Something must of changed but don't know what. Under Network Service I changed the Base Port to 52005 and that error went away. Any

+ AA6YQ comments below Is there a way to enlargen size the font size (or use bold font) in the antenna presets buttons on DX View? + There is no font size control specific to DXView's antenna

I have also gotten many of these. Some are nice cards, other's very generic with a "typewriter" font that's hard to read. I should just dump them but I have been answering since old habits die hard. I

+ AA6YQ comments below Ah, I found the 'Permit uploading of QSOs already uploaded to LOTW' checkbox. Also noticed that once you do an upload with this checked, it apparently automatically resets

There is an “unsubscribe” link at the bottom of the QSL World emails. Seems to work so far for QSLs I have received for 3 different callsigns I hold. Lee, KY7M

I've been playing with SpotCollector's Web Server, which I had working before I got my current home router, a TP-Link. I see the spots both on my computer and phone, but the font is in red on a black

yes its checked 73 Alex, OE3JTB

Did you check your clock and computer time zone? <https://www.dxlabsuite.com/dxlabwiki/EmptyDatabase> 73, ... Joe, W4TV

Am 30.04.2025 um 15:34 schrieb John Merrill N1JM via groups.io: Same has happened today on my site. I closed DXK and started it again and no error was reported so far. 73 Matthias, DD7NT

Hi Dave, There is no Errorlog.txt anywhere in the DXLab folder. I can’t see how to create one, so assume it shows up when an error occurs. I’ve also rebooted the computer. There are 0 Spot

Thanks for the responses. I discovered that this was during the 100th Anniversary for ARRL and they were running portable to each state so that people could get a special WAS by working W1AW in all

Ah, I found the 'Permit uploading of QSOs already uploaded to LOTW' checkbox. Also noticed that once you do an upload with this checked, it apparently automatically resets the checkbox after the

WA is not a valid ARRL section; Washington state is divided into two ARRL sections (EWA and WWA). Okanogan county is in EWA, so changing the ARRL Section for that QSO from WA to EWA will fix the

There is no ARRL section WA, only sections EWA and WWA. DXKeeper knows what section each county is in. I've found that if you edit the Q and reselect the county (just bring up the drop-down, and