开云体育

2025-03-25 20:22:08.824 > RadioFreq + theAdjustment = -0.01 2025-03-25 20:22:08.824 > CIVModule.SetXcvrFreq: NewFreq = -0.01, theBand = -1, QSYBand = -1 2025-03-25 20:22:08.824 >

Still trying to get Commander up and running with the Icom 7800. Am using a straight through DB-9 cable. have set the 7800 ci-v to on, ci-v address to 6A in both commander and the 7800 but still

Thanks Dave. What started this is I was looking for a feature that the gateway did not provide so I discussed it with Dave and he asked if I wanted to take a look again at taking over maintenance. We

Thanks Dave It was the databases in DXView the caused the problem. -Kurt, KR2C

Hi to Dave and Stan, Like Stan, that process is OK, but I think I will stick to my "Sticky Notes" on screen, where I keep a list of new ones worked until they are confirmed. For the (now) two new

Hi, The Intel UHD 730 chipset supports 4k resolution. (Max 4096x2160@60Hz). Depending on the motherboard you might not need an additional graphics card. I use a 32 inch 4K monitor. Make sure it

+ AA6YQ comments below + Understood. It's only appropriate if you don't want to wait for one DXCC award application to be processed by the ARRL's DXCC desk before generating the next one. 73, Dave,

+ AA6YQ comments below + I use a 32" HP Z32 display, whose resolution in 3840 x 2160, driven by an Nvidia GTX760. As you can see in this screenshot, it can simultaneously display SpotCollector's,

Hi Dave,

# AA6YQ comments below It would be handy if ADIF/Dave were to defined a 'P' (pending) status for those of us who prefer to manually prepare submissions as the confirmations arrive. # You can

Hi Dave, Using these instructions? https://dxlabsuite.com/dxlabwiki/UserAwardProgressreports 73 Stan KM4HQE

+ AA6YQ comments below That's ticked, Any other suggestions? + Yes: click the Colors button in the same pane and confirm that the Log Page Display background colors are set correctly. + Also visit

Thanks for reply Dave. That's ticked,? Any other suggestions? -Kurt, KR2C

I hope this is not too far off topic. I'm researching graphics cards and monitors to upgrade my shack to have more DXLabs and WSJT-X windows. My current monitor is a TV/Monitor that just does not

+ AA6YQ comments below + In the Log Page Display panel on the Configuration window's Log tab, check the "Indicate LotW & eQSL AG status" box. 73, Dave, AA6YQ

I moved into a new Win11 PC.? In DXK it showed be what QSL service they belonged to by color.? Now all the contacts appear as white.? What config option am I missing? -Kurt, KR2C

+ AA6YQ comments below + I didn't suggest setting up user-defined codes for QSL_RCVD and LotW_QSL_RCVD because that's not supported. Providing a practical means by which a user could specify how

How does one set up a user defined code within QSL_RCVD and APP_DXKEEPER_LotW_QSL_RCVD that is treated as 'Y' for filling the Progress (RAT) Tables? A separate database field is overkill for this

+ AA6YQ comments below + You can setup a user-defined item named "Pending" and use whatever codes you like to represent the states of your manually-managed award submissions. 73, Dave, AA6YQ

Hi Phil, Yes, you are correct. It should be 'Y' in the LOTW status box. I was thinking of the DXCC progress display, where that entity would show as confirmed using the 'C'. So the new QSOs should