开云体育

The sorting with Excel is exactly what I want! Instead of several hundred line items to go through I have about 30! The other was just -- dreaming, I guess. Thanks, Dave! Earl / KD5XB Sent with Proton

I have always thought that hosting my log on OneDrive was not the way to go, and as documented elsewhere I've configured DXKeeper to back up my log to OneDrive each time it exists. But this article

One drive may not be the best place to have your "operational" log it is an ok place to keep a backup. With what it appears you want to do, it would be better utilizing a local network drive for the

Yesterday I tried to access my log on a laptop at one of my other radios. I installed only Launcher and DXKeeper, and pointed it to my log in OneDrive. Before I started DXKeeper on the laptop I shut

When DXKeeper uploads a QSO to QRZ, QRZ responds with a "logid", which I understood to be a unique identifier within the user's QRZ logbook. DXKeeper saves the "logid" received from QRZ in the

+ AA6YQ comments below Is there any way to change the sort order in the FFMA report? + Not by using DXKeeper. You could open the FFMA report with EXCEL (use the "fixed width" option), and then sort it

Is there any way to change the sort order in the FFMA report? I'd like to have it in reverse DATE order so I could update the new grids I have worked since updating the FFMA spreadsheet. Come to think

Thank You so much for the assistance. I did a search but was unsuccessful in locating this. My wife sez I'm blind. Thanks again, Barry

... via the Databases tab of DXView's Configuration window. Terminate DXKeeper and SpotCollector before directing DXView to update these databases. 73, Dave, AA6YQ

I have seen this same situation between DXKeeper and Spot Collector. Ever since I changed the TQSL file to exef as you recommended previously, the issue has not reappeared. + Thanks for the report,

+ AA6YQ comments below + Commander's Interrogation option is intentionally enabled at startup because control of most radios requires it. For example, Commander can't track the state of your IC-7610's

Dave, I just worked WR7X/P in DN05, home grid DN14cs, and DXKeeper logged it properly as DN05! I will watch for more rovers and see if the /P or /R makes it work. I'll keep you posted. -Chris

Print the instructions and check them off as perform the actions. 73, Dave, w6de Sent: 15 June, 2024 22:41 To: [email protected] Subject: Re: [DXLab] Moving ... Have you reviewed:

Do you have more than one radio defined or a radio defined on the MultiRadio tab? If so, uncheck interrogation there. Do you have a workspace defined and loaded on start-up? If so, uncheck

Have a need to disable Commander’s interrogation of a 7610 (mostly because of documented/captured CIV bus collisions that the flex amp/tuner cannot handle, thats another story). ? If i dont, the

rr

With me the TQSL.exef dosent work, I wrote a script where PF is started first, and than all other programs, thats working fine for me 73 Alex, OE3JTB

I should have mentioned I am controlling an Elecraft K4 by using remote desktop (in my case, RustDesk or AnyDesk) and "tuning" by mouse-wheeling in the VFO A panel of Commander. In theory, any knob

Dave, I have seen this same situation between DXKeeper and Spot Collector. Ever since I changed the TQSL file to exef as you recommended previously, the issue has not reappeared. Bruce - K5WBM

Chuck, ??? What kind on radio are you controlling remotely and how? Gordon - N1MGO