开云体育

Did you reboot the computer ??? Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 Sent: Wednesday, June 24, 2020 7:39 PM To: [email protected]<mailto:[email protected]>

Hi All, Trying to install N1MM+ on a new(er) computer today. Intel Quad core, 8 Gb RAM, 2 monitors, latest update to Windows 10, latest update to N1MM+. Using the computer only as a control station

Thanks for testing and the report, Robie! 73, Dave, AA6YQ

+ AA6YQ comments below how do I setup up dxkeeper for arrl field day thanks in + See <https://www.dxlabsuite.com/dxlabwiki/ARRLFieldDay> 73, Dave, AA6YQ

My experience was, I had only logged W7GJ with grid DN56. The LotW report showed that he had also confirmed on 3 other grids. I updated the QSO with those other grids, did an LotW Update on the QSO,

+ AA6YQ comments below Thanks for the suggestion, however there is no change. I looked at the LoTW entry and see that he used 6 digit grid locators i.e. DN66XA. I had also entered grids in the same

how do I setup up dxkeeper for arrl field day thanks in advanced

Seb, Thanks for the suggestion, however there is no change. I looked at the LoTW entry and see that he used 6 digit grid locators i.e. DN66XA. I had also entered grids in the same fashion. I

Select the QSO you had with W7GJ in DXKeeper, and right click, then select Update from LotW. Lance has solved the issue he had with the initial upload and you should now see all the grids confirmed.

Dave, On 6/20/2020 I worked W7GJ on 6 M FT8. He was located at the junction of 4 grids DN55, DN56, DN65 & DN66, a really nice catch for a grid chaser! I logged him with grids 1-4 containing the

Carl, No, I use digital [WSJT-x] as well as CW, SSB. For digital, I have JTAlert logging to DXK. I have Grid Tracker reading a manually exported ADIF file created in DXK that GT reads on startup. I

Hi Jim. I'm assuming you're working digital modes on WSJT-X.? If you want to mix in your SSB & CW QSO's, you'll need to do that manually. If you want GridTracker to use the WSJT-X wsjtx_log.adi file,

+ AA6YQ comments below is is possible to "comment out" a line is the command section? Such as is done is a bat file? It would assist in experimentation with commands. + Copy the command to its

Dave- is is possible to "comment out" a line is the command section? Such as is done is a bat file? It would assist in experimentation with commands. Thanks Dan KC2STA

Thanks Dave, Jim – KR9U Sent: Monday, June 22, 2020 7:22 PM To: [email protected] Subject: Re: [DXLab] ADIF file write on shutdown - request. + AA6YQ comments below I have been doing the ADIF export

This. Have had RTTY AFSK working well for some time. Thought I would tackle FSK. Forced me to learn more about 7610/DXL/WW/MMTTY/EXTFSK64 etc. When I got started in amateur radio in the fifties as a

Rick, Something to consider.? If the 7610 works FB on FT8 (or PSK31, other "sound card" modes), then it should work fine as well on RTTY/AFSK.? There's no actual benefit to FSK with that rig.? And

+ AA6YQ comments below Found one setting in the 7610 menus to be incorrect. My fault but the (Icom) documentation was pretty vague. Anyhow, in monitoring my RTTY FSK transmission on a separate

Found one setting in the 7610 menus to be incorrect. My fault but the (Icom) documentation was pretty vague. Anyhow, in monitoring my RTTY FSK? transmission on a separate receiver or with the 7610

+ AA6YQ comments below + I do not want to encourage the use of ADIF files containing every logged QSO for interoperation. If the developer of GridTracker would like to directly interoperate with