开云体育

+ AA6YQ comments below That’s not the same on a 7300. You don’t need an external circuit. I just set my 7300 up on MMTTY last week. Just needed the USB port and the EXTFSK64 DLL. Plus the right

+ AA6YQ comments below That is only the case if you use an eternal CI-V interface for CAT *or* use a third arty "port splitter" to split the RTS/DTR (PTT/FSK) and TxD/RxD lines (CI-V) to separate

+ AA6YQ comments below against Gremlins in radio shack, I've found this on the internet: http://k9jm.com/CIV_Router/CI-V%20Router.html It would be interesting to know what do you think about this

+ AA6YQ comments below Now that I have WSJT-X directly directly connected to SpotCollector and it is working. I want my Band Activity Calls (while monitoring 6 meter MSK144 with WSJT-X) to

against Gremlins in radio shack, I've found this on the internet: http://k9jm.com/CIV_Router/CI-V%20Router.html It would be interesting to know what do you think about this gadget. 73 de Salvatore

That is only the case if you use an eternal CI-V interface for CAT *or* use a third arty "port splitter" to split the RTS/DTR (PTT/FSK) and TxD/RxD lines (CI-V) to separate port numbers. Windows

To Simplify: I have separate WSJT-X configurations for each mode: If I change my WSJT-X configuration from MSK144 to FT8, everything decoded in X shows up in SpotCollector with network WSJTX As soon

That’s not the same on a 7300. You don’t need an external circuit. I just set my 7300 up on MMTTY last week. Just needed the USB port and the EXTFSK64 DLL. Plus the right settings in the rig.

Now that I have WSJT-X directly directly connected to SpotCollector and it is working. I want my Band Activity Calls (while monitoring 6 meter MSK144 with WSJT-X) to automatically be uploaded to

FSK RTTY in WinWarbler requires a keying circuit to connect a COM port to the FSK keying input on your rig. I built up an RS232/TTL converter that I have attached to COM2 and it is connected from

+ AA6YQ comments below Using IC-7300, DXLab and windows 10. I am having a problem sending RTTY. When I click on start in Winwarbler I get a solid tone. + That means you don't have WinWarbler

Using IC-7300, DXLab and windows 10. I am having a problem sending RTTY. When I click on start in Winwarbler I get a solid tone. I also have a stand alone version of MMTTY which works perfectly. I am

+ AA6YQ comments below I only have one radio at a time power up when I am using them. The issue I have is I am using ARMY MARS software M110A, that controls transmit thru CAT control in the

I only have one radio at a time power up when I am using them. The issue I have is I am using ARMY MARS software M110A, that controls transmit thru CAT control in the software. For some reason I an

+ AA6YQ comment below The 7300 and the 7200 are connected by USB (Silicon Labs CP210x USB to URART bridge- Icom ver 1.30 USB driver) cable. Both the 7200 and the 7300 have both the "CI-V Transceive"

Also the interval is set to 200 for all three radios

The 7300 and the 7200 are connected by USB (Silicon Labs CP210x USB to URART bridge- Icom ver 1.30 USB driver) cable. Both the 7200 and the 7300 have both the "CI-V Transceive" disabled. The Flex

+ AA6YQ comments below Hello, I have two Icoms-a IC-7300 and a IC-7200, plus a Flex 5000A connected to DL LABS Commander ver 14.4.0 I see a red CI-V indicator on the very bottom of the Commander

Hello, I have two Icoms-a IC-7300 and a IC-7200, plus a Flex 5000A connected to DL LABS Commander ver 14.4.0 I see a red CI-V indicator on the very bottom of the Commander box. Please advise a way of

OK. I think the first time I ever saw DXLab demonstrated was at the IDXC, so I wondered whether you were going to attend. See you next year, then. --Jeff, K6JW