开云体育

This release - correctly evaluates the Shift modifier applied to "Quick Split" buttons - when controlling an Elecraft K3, implements the "VFO B" panel's? "up 1", "up 2", "up 5", up "10",? "dn 1",

-----Original Message----- Sent: Wednesday, March 02, 2016 8:21 PM To: dxlab@... Subject: Re: [dxlab] Commander Bandspread "tolerance" Works as advertised. I appreciate not losing spots in

Works as advertised. I appreciate not losing spots in the band map when tuning the RX a short way out of the band. I have other soft- ware and hardware that inhibit PTT when the transmitter is out of

Peter, if you have an ADIF file that contains QSOs with split frequencies specified in Comment fields, please attach it to an email message, and send it to me via aa6yq (at) ambersoft.com Without it,

QSOs for which an Inbound OQRS request have been received cannot be distinguished from QSOs for which no Inbound OQRS request has been received: each logged QSO has "QSL Sent Via" and "QSL Rcvd Via"

-----Original Message----- Sent: Wednesday, March 02, 2016 6:32 PM To: dxlab@... Subject: [dxlab] Re: SpotCollector no JH2ZYY reports hi Dave, in config/ spot sources on jh2zyy the user

hi Dave, in config/ spot sources on jh2zyy the user name is VK4WTN but there is no password ( none of the other DXclusters have a password either but they are working). In the Cmd box I have put

On the "Spot Sources" tab, what have you specified as the username and password for connecting to J22ZYY ? 73, Dave, AA6YQ

hi Dave thanks for the quick reply. I typed in unset/prompt into the JH2ZYY command box and pressed enter then pressed connect.The JH2ZYY box shows its connected but the spot source status light is

Thanks. JH2ZYY uses the AR-Cluster application. Using SpotCollector's Spot Source window for JH2ZYY, send this command unset/prompt Then click the Spot Source window's Connect button. Any joy? 73,

hi Dave , thanks for your reply. Host address is jh2zyy.d2g.com Port is 23 enable is ticked and hide is ticked regards Wayne VK4WTN

Thanks, Dave

&&&& ->K0PC comments below ---In dxlab@..., <aa6yq@...> wrote :+++ +++ I thought it inappropriate to automatically consider every OQRS request as "un-needed", but I see now that the "QSL

-----Original Message----- Sent: Wednesday, March 02, 2016 12:16 PM To: dxlab@... Subject: [dxlab] 60 meters absense There is an ongoing conversation on another reflector about 60 meter

There is an ongoing conversation on another reflector about 60 meter communication, including working DX. I noticed that 60 meters is absent from most of the band progress charts in DXLab

[dxlab] <dxlab@...> wrote:

-----Original Message----- Sent: Wednesday, March 02, 2016 1:10 AM To: dxlab@... Subject: [dxlab] SpotCollector no JH2ZYY reports Hi all, just wondering I dont ever seem to get any spots

### more AA6YQ comments below

-----Original Message----- Sent: Wednesday, March 02, 2016 1:00 AM To: dxlab@... Subject: [dxlab] Re: "Inbound OQRS" greyed out ---In dxlab@..., <aa6yq@...> wrote : +++ Makes