开云体育

-----Original Message----- Sent: Tuesday, February 23, 2016 12:50 PM To: dxlab@... Subject: RE: [dxlab] NPOTA Dave one of the members of the list suggested I go to the LOTW site and

Good morning all... To track my?WORKED NPOTA QSO's that have not QSL'ed... I upload QSO(s)?at end of the day...then each morning after sync'ing with LotW; ?I run the?NPOTA Report ?(DXK/Check

Dave one of the members of the list suggested I go to the LOTW site and research the QSO for this info. <APP_LoTW_NPSUNIT:4>TR23 When I looked up the QSO information I found that exact line in the

-----Original Message----- Sent: Tuesday, February 23, 2016 4:53 AM To: dxlab@... Subject: [dxlab] cannot save QSO with FR4PV i cannot save the QSO with FR4PV DXCC code 453 = FR (Reunion

Hi, i have a problem with the configuration of WW (ptt-control) with fsk. Question: uses an OM WW and RigExpert TI-5 and can help me with configuration? vy 73 de DF9DD Eckhard ("Ed")

Entirely possible ... there are a lot of lids out there using software that only supports USB and spot "dial" frequency for everything (PSK, RTTY, JT65/JT9, etc.). 73, ... Joe, W4TV

John, In WinWarbler's Configuration window, under the RTTY tab, make sure that in the dark grey areas you have the radio button for LSB in the FSK area selected, Xcvr Mode set to RTTY, *Mark Offset

The "first cut" looks good to me, Dave. Iain's suggestion on using a workspace is good. I didn't think of that even though I have a workspace with all my usual settings. Duh! 73, Paul N1BUG

Dave- In Spot Collector, one can right-click a spot and select "display spots of (call) near (freq) in (mode)". I find this quite useful. Would it be possible to modify Spot Collector to give the

Thanks, Rich - I have the K3 in FSK D, mark 2125, 170hz shift. Maybe I just hit some bad spots, didn't do any RTTY this past weekend to check. Will keep looking. 73 John K3TN

Hi, i cannot save the QSO with FR4PV DXCC code 453 = FR (Reunion Island) (DXCC is red blinking). The error message is: the QSO cannot be saved because it contains on or more invalid items or is

This release - when controlling a radio that uses the TenTec Pegasus protocol, updates the Pegasus.in file with a single write operation (tnx to Carl N4PY and Jerry KG6TT) - corrects a regression in

-----Original Message----- Sent: Monday, February 22, 2016 9:28 PM To: dxlab@... Subject: RE: [dxlab] Unable to show resolts of summerizing logs It worked for the DXCC awards but the WAS

Thanks Dave It worked for the DXCC awards but the WAS Award report does not show the breakdown for the states, just the totals of the bottom of the report. Steve Wendt USN (Ret) KB9RDS

-----Original Message----- Sent: Monday, February 22, 2016 7:57 PM To: dxlab@... Subject: [dxlab] Unable to show resolts of summerizing logs When i update logs from LOTW or EQSL and do a

Thanks, Paul. I incorporated Iain N6ML's "Use a Workspace" suggestion in this first cut: <http://www.dxlabsuite.com/dxlabwiki/DXCCSprint> Comments? 73, Dave, AA6YQ

MS just came out last week and advised that they were no longer going to support several IE versions. Its according to your Windows versions, but in my case W7 must have IE11 in order for it to be

11.103 but I don't normally use IE, so maybe I need to update it. Andy dxlab@...> wrote:

When i update logs from LOTW or EQSL and do a summarize to see where the DXCC stand. It shows an empty summarize page which shows No report. The log has close to 4000 entries in it so i know it is

Pathfinder uses Internet Explorer as its web browser, so Internet Explorer is the source of any script errors reported. What version of Internet Explorer is installed on your PC, Andy? 73, Dave, AA6YQ