开云体育

The addresses for both XE1XOE and TG9ANF contain the name of their postal country in the third line, causing DXKeeper to not append a fourth line containing the postal country: Miguel E. Arechavaleta

It was Larry W6NWS who reported the problem. I just tried a lookup of XE1XOE: it now returns <country>Mexico</country> <ccode>171</ccode> The country is now correct, but the country code remains

Fixed. The Orion has a sepaprate gain in software for the rear AUX input. Mine was set to 4%. Advancing it increased power

On the Config window's Soundcard tab, click the "Mixer adjustments" panel's Transmission button. This will display a "Playback control" window whose contents and nomenclature may be dependent upon

OK, thats beyond me as dont use any of that, but am sure others now knowing what is up, will be able to help. I get into the same positon here, hearing the diddles in the earphone but nothing keying

The Orion rf output was set to 60%. Should have been about 60 watts. Chuck ============================ charles_chandler@... ws1l@... charles.r.chandler@... chchandl@...

Sounds like you're transmitting, then. You mentioned that another RX in the shack is copying your signal, which would lend credence to this assumption. Is the power out control at its normal

Does your transceiver switch from RX to TX when you transmit? 73, Dave, AA6YQ

Rig is Orion. Interface is microham USB interface II. VOX is via the interfaces ptt, which works. At least, when I put my call into the tx pane and hit f2 the rig switches to transmit, sends my

Which interface are you using, and which rig? Are you using VOX at the rig, or in the CAT or in the interface? Sounds like you are not turning the rig keying on. Danny Douglas N7DC ex WN5QMX ET2US

When I transmit RTTY I hear my own transmitted tones in my phones, as the monitor is on. That might have been unclear. I'm just not seeing any power

Today I saw JD1BMM on 17M RTTY and he was very copyable. Unfortunately I have like 3 countries on RTTY so my digi skillz are sadly lacking, as the kids would say. I have a TenTec Orion and a

I see this when DXKeeper is configured to use the QRZ.com data access subscription, but not when configured to use the ad-based "QRZ.com via Pathfinder". Here's what the QRZ.com data access

I was doing some lookups today using the Address Editor and got some strange stuff. XE1XOE, for example, ended with "mellish reef"! TG9ANF address ended up "heard island". If I go directly to QRZ the

Dave AA6YQ wrote:

When I click on a RTTY spot in SC, Commander sets my FT-1000MP to DUAL and SPLIT and sets VFO A to QRG and VFO B to QSX. Now that is OK with me BUT, the WW waterfall frequencies are VFO B. The

For those of you running WinWarler with a WinKeyerUSB, I use the ptt port on the WinKeyer to assert ptt Just curious what settings you use for Lead time and lag time. pse and

Dave: Thank you very much for the explanation..........very interesting! I've worked a lot of German stations over the years. I'll have to go back and check! Once again Thank You! Oder

-----Original Message----- From: dxlab@... [mailto:dxlab@...]On Behalf Of BIll Duffy Sent: Monday, November 30, 2009 6:51 PM To: dxlab@... Subject: Re: [dxlab] New

I realize this is a DUMB question. I am not familiar with the DOK database. Obviously a European( Belgium, Germany?) orginization. Educate me please. Thanks Bill KA0VXK