When using DXView World Map the WSJTX FT8 qso path is plotted correctly;y. If i enable DX Atlas map instead of the World Map, the qso path is not plotted. Is it possible to have the qso path shown in DX Atlas?
?
73 Paul w2eck
|
Don,
Just don’t forget to periodically go back and delete some of the older backups.
toggle quoted message
Show quoted text
Good idea Bruce,
I turned that on as well.? As a former systems analyst I'm kind of kicking myself.? One of my primary jobs was to write code to backup headend unix servers and verify them for integrity.? I hang my head in shame! :)? At least I didn't? lose anything this time!
73, Don VA7ZT On Fri, Feb 14, 2025 at 5:37?AM Bruce - K5WBM via <bruce.mclain= [email protected]> wrote: DXKeeper can automatically backup your log on shutdown.? That won’t protect from a spontaneous PC reboot but at least you would have a backup from the last DXKeeper shutdown which might minimize the lost data.
I shutdown DXKeeper every evening and it backs up my log to my NAS.
Yep, I know.? I'm a systems analyst.? I just need to smarten up and do backups more often.? The plan is to replace the computer when we get moved into our new house but for now it's the best I can do.? I'll start doing a backup everyday just in case.?
73, Don VA7ZT + AA6YQ comments below
I keep the log file on a Raid 5 NAS drive because I know the little computer at my rig is an old piece of garbage.? It's done spontaneous reboots once in a while since I got it several years ago.
+ A RAID drive won't protect against disk corruption caused your PC's spontaneous reboots; RAID protects against data loss due to disk failure, not incorrect write operations from the PC - as you've now experienced. ? ? 73, ? ? ? ? ?Dave, AA6YQ
|
Re: Can't Enable DX Atlas ?
The problem has been fixed by installing an updated version of DX Atlas. V2.41
?
73 Paul w2eck
|
Good idea Bruce,
I turned that on as well.? As a former systems analyst I'm kind of kicking myself.? One of my primary jobs was to write code to backup headend unix servers and verify them for integrity.? I hang my head in shame! :)? At least I didn't? lose anything this time!
73, Don VA7ZT
On Fri, Feb 14, 2025 at 5:37?AM Bruce - K5WBM via <bruce.mclain= [email protected]> wrote: DXKeeper can automatically backup your log on shutdown.? That won’t protect from a spontaneous PC reboot but at least you would have a backup from the last DXKeeper shutdown which might minimize the lost data.
I shutdown DXKeeper every evening and it backs up my log to my NAS.
Yep, I know.? I'm a systems analyst.? I just need to smarten up and do backups more often.? The plan is to replace the computer when we get moved into our new house but for now it's the best I can do.? I'll start doing a backup everyday just in case.?
73, Don VA7ZT + AA6YQ comments below
I keep the log file on a Raid 5 NAS drive because I know the little computer at my rig is an old piece of garbage.? It's done spontaneous reboots once in a while since I got it several years ago.
+ A RAID drive won't protect against disk corruption caused your PC's spontaneous reboots; RAID protects against data loss due to disk failure, not incorrect write operations from the PC - as you've now experienced. ? ? 73, ? ? ? ? ?Dave, AA6YQ
|
Re: Cannot get Commander to Connect to SDR
Larry, thanks for your tip…if we cannot get it to work as we had before, this will b a fall back position. ?BTW, SmartLink should have nothing to and should not prevent us from connecting Commander to the Flex 6500. ?
Said differently, Smartlink has nothing to do with any logging or radio control programs.
Smartlink is a network communication tool that connects SmartSDR software to a Flex radio when the radio is in a different location from the SmartSDR software.
Mark
toggle quoted message
Show quoted text
On Feb 14, 2025, at 8:41?AM, Larry Benoit via groups.io <lbenoit@...> wrote:
Dave,
?
This is an alternative method that uses Flex SmartSDR CAT and is therefore more secure.?
?
73,
Larry KB1VFU
?
|
Re: Cannot get Commander to Connect to SDR
Dave,
?
This is an alternative method that uses Flex SmartSDR CAT and is therefore more secure.?
?
73,
Larry KB1VFU
?
|
DXKeeper can automatically backup your log on shutdown. ?That won’t protect from a spontaneous PC reboot but at least you would have a backup from the last DXKeeper shutdown which might minimize the lost data.
I shutdown DXKeeper every evening and it backs up my log to my NAS.
toggle quoted message
Show quoted text
Yep, I know.? I'm a systems analyst.? I just need to smarten up and do backups more often.? The plan is to replace the computer when we get moved into our new house but for now it's the best I can do.? I'll start doing a backup everyday just in case.?
73, Don VA7ZT + AA6YQ comments below
I keep the log file on a Raid 5 NAS drive because I know the little computer at my rig is an old piece of garbage.? It's done spontaneous reboots once in a while since I got it several years ago.
+ A RAID drive won't protect against disk corruption caused your PC's spontaneous reboots; RAID protects against data loss due to disk failure, not incorrect write operations from the PC - as you've now experienced. ? ? 73, ? ? ? ? ?Dave, AA6YQ
|
Re: Spot Collector Need Filter Troubles
Problem solved.? Pilot error (as usual).? Sri for take up the bandwidth.
?
Dale
|
Re: Spot Collector Need Filter Troubles
Correction - My custom filters for stuff like just CW or just 160 or just 160CW show the spot but the filter for DXCC with the filter box showing YB shows a bunch of YB spots but not this needed one.
?
Dale
|
Spot Collector Need Filter Troubles
This morning a spot showed up for YB1JCD on 160 CW on SC.? In the Needed column the spot showed a D which agrees with what DXView shows for YB Progress (DXV shows no QSO's on 160 in any mode for YB).? My problem is that when I choose the Need filter in SC the spot doesn't show up (it does show other needed spots, but no this one).? All of my other filter that I expected to show that spot do show it but just not the Need filter.? My Need filter is set to filter for Band and Mode and (Unconfirmed DXCC, IOTA, VUCC, WAZ). It's been set that way for years and I have never seen a spot for a needed one not show up in the Need filter.??
?
Can someone please point me in the right direction to solve this???
?
Thanks,
?
Dale, AA1QD
|
It has happened to me with Windows 10.
?
73,
Rich VE3KI
?
On Fri, Feb 14, 2025 at 06:32 AM, David A92GE wrote:
Yes I get the same behavior - I hadn't tried this before. If I double click on the tiny window the normal size window pops up with the status bar as before. It must be a Windows 11 thing.
?
73
?
David
A92GE
|
Yes I get the same behavior - I hadn't tried this before. If I double click on the tiny window the normal size window pops up with the status bar as before. It must be a Windows 11 thing.
?
73
?
David
A92GE
|
Re: Spotcollector A Index
+ AA6YQ comments below
Recently, I have noticed the A index from WWV as reported in Spotcollector, has been showing as 86 and highlighted with a dark red color. That does not seem correct.?
?
Data as of this evening: 14 Feb 2025 04:26Z as reported in my copy of SC 9.8.3
SFIO 219, A 86, K 4
?
+ SpotCollector accepts the WWV "readings" it receives from your spot sources.
? ? ? ?73,
? ? ? ? ? ? ? ? ?Dave, AA6YQ
|
Re: Cannot get Commander to Connect to SDR
+ AA6YQ comments below
Set WSJTX Radio to? Kenwood TS2000 and Serial Port to COM4.?
?
Create new COM5 serial port with SmartSDR CAT.
?
Configure DX Commander Radio to KENWOOD and configure Commander ?to connect to? SmartSDR CAT serial COM5 (Commander Ports tab > Primary CAT Serial Port > Port #5).
?
If? SmartSDR CAT ports COM4 or COM5 are? in currently in use by other applications, create new serial port(s) and configure the Commander and WSJTX Port numbers accordingly (for example my setup below).?
?
This works flawlessly for remote ops with my Flex 8600.
?
+ Are you referring to the configuration you described in this article, Larry? ? ? ? 73, ? ? ? ? ? ? ?Dave, AA6YQ
|
Recently, I have noticed the A index from WWV as reported in Spotcollector, has been showing as 86 and highlighted with a dark red color. That does not seem correct.?
?
Data as of this evening: 14 Feb 2025 04:26Z as reported in my copy of SC 9.8.3
SFIO 219, A 86, K 4
?
????
?
73, Don AD0K
|
Re: Cannot get Commander to Connect to SDR
Dave,
?
Set WSJTX Radio to? Kenwood TS2000 and Serial Port to COM4.?
?
Create new COM5 serial port with SmartSDR CAT.
?
Configure DX Commander Radio to KENWOOD and configure Commander ?to connect to? SmartSDR CAT serial COM5 (Commander Ports tab > Primary CAT Serial Port > Port #5).
?
If? SmartSDR CAT ports COM4 or COM5 are? in currently in use by other applications, create new serial port(s) and configure the Commander and WSJTX Port numbers accordingly (for example my setup below).?
?
This works flawlessly for remote ops with my Flex 8600.
?
73,
Larry KB1VFU
?
?
?
?
?
|
Yep, I know.? I'm a systems analyst.? I just need to smarten up and do backups more often.? The plan is to replace the computer when we get moved into our new house but for now it's the best I can do.? I'll start doing a backup everyday just in case.?
73, Don VA7ZT
+ AA6YQ comments below
I keep the log file on a Raid 5 NAS drive because I know the little computer at my rig is an old piece of garbage.? It's done spontaneous reboots once in a while since I got it several years ago.
+ A RAID drive won't protect against disk corruption caused your PC's spontaneous reboots; RAID protects against data loss due to disk failure, not incorrect write operations from the PC - as you've now experienced. ? ? 73, ? ? ? ? ?Dave, AA6YQ
|
+ AA6YQ comments below
I keep the log file on a Raid 5 NAS drive because I know the little computer at my rig is an old piece of garbage.? It's done spontaneous reboots once in a while since I got it several years ago.
+ A RAID drive won't protect against disk corruption caused your PC's spontaneous reboots; RAID protects against data loss due to disk failure, not incorrect write operations from the PC - as you've now experienced. ? ? 73, ? ? ? ? ?Dave, AA6YQ
|
Thanks Dave,
I'll look into it.? I keep the log file on a Raid 5 NAS drive because I know the little computer at my rig is an old piece of garbage.? It's done spontaneous reboots once in a while since I got it several years ago.? All I do with it is DXLab and WSJTX.? No other software is installed on it and other than spot collector, doesn't use the internet for anything.
Normally if it reboots and holds the lock file open I just make a copy of the log in a different directory and it will open fine.? This is the first time that I had this issue with it.? I'll do a full recompute on it as well as run some reports to see if my #'s on things like DXCC are right.? And tonight I'll run a disc check to see if the HD is packing it in.
73, Don VA7ZT
+ AA6YQ comments below
I'll do all that.? Very odd.? I've had issues with lock files not being released after a crash but this was a first
+ A crash that occurs while writing a record to a database like your log can easily leave the records in that database's multiple tables in an inconsistent state. Partially-updated records are another possibility. If the crash was caused by a hardware failure, all manner of bad things can happen. + I suggest checking the Windows Event Log to see what actually happened. Preventative maintenance or replacement could avert a repeat performance. ? ? ? ?73, ? ? ? ? ? ? Dave, AA6YQ
|
+ AA6YQ comments below
I'll do all that.? Very odd.? I've had issues with lock files not being released after a crash but this was a first
+ A crash that occurs while writing a record to a database like your log can easily leave the records in that database's multiple tables in an inconsistent state. Partially-updated records are another possibility. If the crash was caused by a hardware failure, all manner of bad things can happen. + I suggest checking the Windows Event Log to see what actually happened. Preventative maintenance or replacement could avert a repeat performance. ? ? ? ?73, ? ? ? ? ? ? Dave, AA6YQ
|
wc3w
Dale Drake
David A92GE
Inbody, Don