开云体育

I have a Flex 6600 and I'm running Commander 16.0.3.? I am using FLEXSIG as the radio model.? Each time I start Commander it fills in the Radio Selection fields with incorrect information.? If I

Something in those QSOs (grid, zone, etc.) was updated from that station's station location data. If you have no need to review those QSOs, you may clear the Select from Advanced Sorts, Filters, &

I did an "Update from LOTW". Now I have a 400+ Qs with the SelectBox Checked. What is the cause and what is the best way to clear the box? I don't want to cause any issues. TNX Will WC2L -- William

Thanks Dave, I reinstalled a new Windows 11, then I reinstalled the Dx Lab suite (Laucher, and others) then copied c:\DXlab from the old Windows to the new one then reloaded the .reg files (using the

+ AA6YQ comments below Is there a way to output the frequency from DX Commander to Logger32 or other application? + Commander provides documented programmatic interfaces via DDE and TCP/IP that

Is there a way to output the frequency from DX Commander to Logger32 or other application? Thanks, Brian KC4KK

+ AA6YQ comments below + Did you install DXLab on a new PC running Windows 11, or did you upgrade to Windows 11 and then re-install your DXLab apps? + What does "reloading the registry bases

Hello, I reinstall in windows11. The link between Commander and SpotCollector works well (the qsy works well) except the Bandspread which does not display the spotted callsigns. This both at the

I added this at the base of my vertical and eliminated a lot of RFI: https://photos.app.goo.gl/Ktt8saA1bWbMaaKq5 -- John P. WA2FZW

+ AA6YQ comments below + And that was just the first step! 73, Dave, AA6YQ

+ AA6YQ comments below Shiny new Windows 11 PC for ham radio only with my IC-7610. + Step-by-step instructions are here: https://www.dxlabsuite.com/dxlabwiki/MovingBetweenPCs Is there a

+ AA6YQ comments below Showing my ignorance here, but how do I use this? + If you were pursuing DARC DOK awards https://www.darc.de/en/der-club/referate/committee-dx/diplome/doks-of-darc/ + the

+ AA6YQ comments below I'm looking for a way to get the tqsl station locations in a text file, any ideas? + Direct your favorite text editor to open %appdata%\TrustedQSL\station_data 73,

Funny. HAHA ? Outlook LT Gil W0MN Hierro Candente Batir de Repente 44.08226 N 92.51265 W EN34rb Sent: Tuesday, February 4, 2025 3:40 PM To: [email protected] Subject: Re: [DXLab] RFI

Shiny new Windows 11 PC for ham radio only with my IC-7610. ?Is there a preferred order in which I should download and set them up? The only thing on it now is MS Edge, AVG Security and RT Systems

Showing my ignorance here, but how do I use this? Thanks, Earl / KD5XB e e Sent with [Proton Mail](https://proton.me/mail/home) secure email.

+ AA6YQ comments below: + To do that, trace the RFI through your computer's motherboard to determine which components are adversely affected and in exactly which sequence, accurate to the cycle time

+ AA6YQ comments below + WinWarbler installation does not create an empty Phone folder because it would cause some users to worry that their installation was incomplete. The Phone folder is only

+ AA6YQ comments below + First, backup your log by clicking the Backup button in the "Backup folder" panel on the Configuration window's Log tab. + There is a QSL checkbox in the left-most column of

I'm looking for a way to get the tqsl station locations in a text file, any ideas? thanks, Gordon - N1MGO