开云体育

As of 9 AM EDT (1300z), the LotW Status page is reporting all three ports (services) down. Ports 443 and 80 showed ~83% availability but the overall uptime was only ~7%. I would suspect that network

The server status page reported 2 of 3 servers online this morning, but ARRL has not said anything about using it yet. I might suggest that trying to use it before ARRL gives the go ahead could cause

I am able to log in to my LoTW home page. DXKeeper successfully executed a "Sync LoTW QSLs" operation, reporting the confirmation of two QSOs made just before the onset of the "incident". Both

On Tue, Jun 25, 2024 at 10:11 AM, ab2ul wrote: > > I have recently started experiencing an issue with DXLab Launcher stopping > Kiwisdr online program. > > About 3 weeks ago I began using the N1NTE

Hello, I have recently started experiencing an issue with DXLab Launcher stopping Kiwisdr online program. About 3 weeks ago I began using the N1NTE KiwiSDR site during a Net while using the DX lab

The correct ADIF is: 73, ... Joe, W4TV

So I have to upload the QSO mode = MFSK submode = Q65? Or mode = Q65 73, Aart PA3C

+ AA6YQ comments below + The ADIF specification does not define Q65C as a valid mode or submode: http://adif.org.uk/ADIF_Current#Mode_Enumeration http://adif.org.uk/ADIF_Current#Submode_Enumeration

I tried to upload qso's with mode Q65C to Eqsl. But they were refused. Any tips, or is Eqsl not up to date with (not-so-new) new modes? Something with mode/submode but could not find in the wiki how

+ AA6YQ comments below + Does the IC-705 have a dual CI-V bus interface?

All I can say it that using the supplied Icom commands from the respective Radio’s manuals is that it works, and it has for me for several years. And that the approach for PW1 collision isolation

If that's the case, why don't you connect PG/TG to the MK II Aux CI-V output? The Aux CIV is isolated and emulates the Icom "Transceive" data with no collisions. Use MK II to the transceiver's CI-V

+ AA6YQ comments below + I suspect that you are correct, Dave, but I have asked Icom several times for a statement from Icom Japan confirming that Icom radios with two CI-V bus ports behave in this

Your Icom 7610 can handle this problem for you. In Menu1 select “Connectors”, in connectors select “CI-V”, then in “CI-V Port” select Unlink from [REMOTE]. While there in “CI-V port”

+ AA6YQ comments below + It's not a question of "hardening", it's a question of correcting an egregious defect caused by failing to fully implement the CI-V specification. 73, Dave, AA6YQ

Hi Dave/Joe, apologies for the delayed response, fathers day/holiday got in the way. My comments #### below

Not at all there was a change at my operating system, hint with TSQL.exef is now working also here, seems to be a timing problem before tnx 73 Alex, OE3JTB

Probably not. The original G450A used an *AC* motor the G800DXA and G1000DXA are DC motors. There was a late G450ADC (with no change in markings) with a DC motor but most G450s that you will find are

Thaks Dave, the corrected version cures this issue. 73 Dave G3YMC

I just installed an easy rotor control module in mine and I have been very pleased. EASY-ROTOR-CONTROL vibroplex.com Bruce - K5WBM