开云体育

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the [email protected] group. * /Command Sequences and

+ AA6YQ comments below Scott, I sent you some sequence buttons and sliders for the ft-891. It was easier just to send you those all files to then upload each one individually to the group. Dave thank

+ AA6YQ comments below I have been using DXLab for approximately 8 months. As recommended by Dave, I have been turning one application on at a time as I learn how they all work. I have now logged in

Scott, I sent you some sequence buttons and sliders for the ft-891. It was easier just to send you those all files to then upload each one individually to the group. Dave thank you for all you do it

+ AA6YQ comments below I've somehow gotten things completely screwed up as I once had this wonderful setup working, panadapter. DX Keeper logging and all. Now not only are things not working at all

+ AA6YQ comments below Sorry to be a lid but I've looked and looked in the docs and can't find instructions for setting up the apps so that needed grids get the nice SpotCollector highlight font the

I've somehow gotten things completely screwed up as I once had this wonderful setup working, panadapter. DX Keeper logging and all. Now not only are things not working at all but when I close

This is what I did for the VHF contest.? I logged using the NA VHF option in WSJT-X. I used DXK for SSB and CW QSOs?? However I did not remember to? put in the frequency for SSB or CW QSOs. I had

+ AA6YQ comments below FWIW, there is an issue with the current version of SpotCollector when the grid for a spot [database entry] is derived from the DXCC database entry matching the station's

+ AA6YQ comments below Probably more a Windows problem, but asking here in case someone has encountered it before. This is likely the failed upgrade to Win 10 v. 2004. After reverting my Windows 10

I understand. It was just an overview of what I did. This provided me exactly what you asked how to accomplish I generally only use dxkeeper as well, but for contexts, I add in n1mm for contest

http://www.dxlabsuite.com/dxlabwiki/GettingStartedwithK1JTModesDirect Jim N7US Sent: Thursday, June 18, 2020 13:31 To: [email protected] Subject: [DXLab] speaking of grids Sorry to be a lid

+ AA6YQ comments below Thanks, Dave. I let things take their course and got the all-clear from ARRL after getting new keys for my old callsigns. Sorry, this is way too much hocus-pocus for my

+ AA6YQ comments below I use DXLabs commander and HDSDR (RSP1a) at the same time with my TS590sg, Commander talks to the USB port and HSDR talks to the RS 232 port, using the Omni-Rig driver in

Thanks Bill. However I do not use N1MM software. I only use DXKeeper. Tim - N8NEU DMR ID 3158619 FN00ah

What I did for the recent vhf contest: Logged with n1mm and ran wsjt under n1mm Used n1mm to dxkeeper bridge to log contest contacts to my main log. Dxkeeper was running. Dxcommander was not. With

Joe - I'm still very fuzzy on this, but I did get the ON/OFF button from the 950 as well as the NB working with the 891. I have several other things I want to add so I'll see if I can figure out from

I have been using DXLab for approximately 8 months. As recommended by Dave, I have been turning one application on at a time as I learn how they all work. I have now logged in over 500 QSOs in

Sorry to be a lid but I've looked and looked in the docs and can't find instructions for setting up the apps so that needed grids get the nice SpotCollector highlight font the way needed countries do.

One update ... The FT-891 command set seems to be [nearly] identical to that of the FT-950. You might want to experiment with some of the User Defined Commands and Sliders for the FT-950 (from the