开云体育

Thanks, Dave. That is EXACTLY what I wanted to see. 7 3 Earl Sent with Proton Mail secure email.

+ AA6YQ comments below Is there a way to sort and filter my log so I can see each country I have worked, but just the first time I worked them? An "ATNO list", if you will. + If you haven’t been

Is there a way to sort and filter my log so I can see each country I have worked, but just the first time I worked them? An "ATNO list", if you will. Thanks, Earl / KD5XB / DM84 e e Sent with

Dave & Joe Exactly what I needed, thank you both. 73 Paul w2eck

GM Joe , thankyou again for the info and SAD abt the Y_RS232 cable not reliably working with "25" years young MP radio. I will try to add an USB_RS232 converter and see if I can let it be recognised

+ AA6YQ comments below + The RAT button is located just above the Log Page Display on the Main window's "Log QSOs"? tab. Clicking it displays DXKeeper's tabbed "Realtime Award Tracking" window. +

You *can* make up a "Y" cable to connect the SPE to the FT1000MP in parallel with the computer *as documented in the SPE Manual*. Note however, that such a connection is not necessarily reliable with

How would you get a list of needed entities by filtering the log? By definition, needed entities would not be present in the log. One *can* however, click *RAT*, select the DXCC tab, check

Is there a way to filter my log to generate a lit of still needed DXCC entities?? 73 Paul w2eck

+ AA6YQ comments below + For which mode have you not yet received DXCC credit for the Card's DXCC entity? + Is the box for that mode checked in the "DXCC Bands & Modes" panel on DXKeeper's

If I understand it (apparently not) When you have a DXCC entity worked on a single band, CW, SSB, Digital and two of the three are verified and one is confirmed. Shouldn't the program ask you to

tnx for the info. I think I have already all the CATs in use: MK_Cat1 goes to the TRX MK_Cat2 goes to the Logger32 Commander Port1_Cat goes to MK_CAT1 Commander Port2_Cat goes to ColibriNanoRX-sdr

tnx for the info. I think I have already all the CATs in use: MK_Cat1 goes to the TRX MK_Cat2 goes to the Logger32 Commander Port1_Cat goes to MK_CAT1 Commander Port2_Cat goes to

# AA6YQ comments below # Would be nice if you'd read the documentation rather than blame the application for your lack of understanding. # What you have confirmed in your log is irrelevant. If from

* WC2L Comments below: + AA6YQ comments below I've got a stack of cards to submit. When I ran the report, it gave me a couple of surprises.. + What does "ran the report" mean? Did you generate a

+ AA6YQ comments below I've got a stack of cards to submit. When I ran the report, it gave me a couple of surprises.. + What does "ran the report" mean? Did you generate a DXCC submission? If so,

I've got a stack of cards to submit. When I ran the report, it gave me a couple of surprises.. A) One was a card with no info why it was being submitted. (band or mode) ?? ???? Turned out to be

Configure your SPE to work with an Icom transceiver, connect the CAT input to the CIV jack on your microHAM MK II (?) and configure the CIV output (System Settings) to output Transmit

+ AA6YQ comments below + Use Commander's Secondary CAT Port to convey your transceiver's frequency to your amplifier; see https://www.dxlabsuite.com/dxlabwiki/ControlDeviceViaSecondaryCATPort de

HI All. My problem is the following: I have working at present time the Yaesu FT1000MP + interface MicroHam+DXLab_commander. All the CAT ports are already in use. I have added a SPE RFPA 1.5K but do