开云体育

If there's an errorlog.txt file in your DXView folder, please attach that to an email message, and send it to me via aa6yq (at) ambersoft.com If that's not the case, please reboot Windows just to make

Yes I have spot collector installed and I say them properly displayed with my personal colors in Spot collector. But not in DXkeeper. J-F VA2SS

-----Original Message----- Sent: Tuesday, March 01, 2016 10:34 AM To: dxlab@... Subject: [dxlab] ClubLog Inbound OQRS and QSL_Rcvd I set up the Inbound OQRS according to the instructions

Core-I5-6260U, 16G memory, 256G SSD. This is the latest Skylake chip. Graphics provided by the Intel CPU. thanks jim ab3cv

This is a new computer with a fresh load of DXlabs. I really don't remember if it happened when it was first loaded or not. Should I just CTL-LD DXView and start it fresh? Or would you prefer I turn

I set up the Inbound OQRS according to the instructions and it works great. Thanks for the feature Dave. My question is about what gets printed in the 'QSL?' field on the labels. The QSL requests from

-----Original Message----- Sent: Tuesday, March 01, 2016 10:19 AM To: dxlab@... Subject: [dxlab] Grey line not showing on DXView World Map 4.1.8 For some reason the greyline and sun

*** more AA6YQ comments below

For some reason the greyline and sun position are not showing on my World Map. I can't find any option to enable or disable it. The map otherwise looks fine in size, resolution and plotting of paths

Dave, Thanks for adding this. 73 Henk PA5KT

---In dxlab@..., <aa6yq@...> wrote : What did I do wrong? +++ I don't know why. Most of my old pre-DX-Keeper QSOs that I imported were set to QSL sent = N and were never changed. In my old

-----Original Message----- Sent: Monday, February 29, 2016 10:57 PM To: dxlab@... Subject: [dxlab] Re: "Inbound OQRS" greyed out OK, so this apparently didn't work. I received the email

OK, so this apparently didn't work. I received the email from Clublog with the test card requests I made earlier today. I pressed the Inboind OQRS button. It flashed, updated the date and time and I

Hi Dave, I agree and I do use phonetics all day along however when someone throws KC8-Chicken With Fries at you its nice to quickly go back to him with KC8 Charlie Whiskey Foxtrot without having to

My recollection is that serial port device drivers don't get loaded when Windows is booted into Safe mode. Why are you booting Windows into Safe mode? The typical reason one does that is to check for

Hello, I'm into unfamiliar territory for me and learning as I go along. I'm debugging trying to get fldigi and DXLab's Commander to work together. I need to know if a "real" RS232 com-port can work in

Jeff, do you have SpotCollector installed? If so, use it to specify the LoTW/eQSL colors. 73, Dave, AA6YQ

Dave Thanks. I had foolishly let MSFT detect the printer and install a driver. At your suggestion I went to the HP site and found a Win10 driver for this P2015dn laser printer. All working fine now!

As do my few that are received… Same time here although it is about 6:30pm (time difference I suspect). … I’m just sayin’ 73 de K3JAE John Etling <mailto:k3jae@...> k3jae@... Sent:

When you have inbound OQRS "bureau request" or " direst request" you are notified once a day via e-mail from Clublog.My notification comes around 830PM local every night. ?73 NR6M ex: KF7NMD