开云体育

Henk, thank you. It is not yet clear to me that my system will handle 4K monitors. I need to learn more, but I read that Dell made several design choices in the XPS 8950 that may limit resolutions

Dave, thank you. Beautiful! Rich, NU6T [email protected]> wrote:

+ AA6YQ comments below It was the databases in DXView the caused the problem. + There was no "problem" - you simply forgot to copy or download the eQSL and LoTW databases to your new computer .

+ AA6YQ comments below

+ AA6YQ comments below + Make sure Commander and your IC-7800 are set to the same baud rate. + You don't want "CI-V transceive" enabled, though enabling it would not prevent interaction + Contact

2025-03-25 20:22:08.824 > RadioFreq + theAdjustment = -0.01 2025-03-25 20:22:08.824 > CIVModule.SetXcvrFreq: NewFreq = -0.01, theBand = -1, QSYBand = -1 2025-03-25 20:22:08.824 >

Still trying to get Commander up and running with the Icom 7800. Am using a straight through DB-9 cable. have set the 7800 ci-v to on, ci-v address to 6A in both commander and the 7800 but still

Thanks Dave. What started this is I was looking for a feature that the gateway did not provide so I discussed it with Dave and he asked if I wanted to take a look again at taking over maintenance. We

Thanks Dave It was the databases in DXView the caused the problem. -Kurt, KR2C

Hi to Dave and Stan, Like Stan, that process is OK, but I think I will stick to my "Sticky Notes" on screen, where I keep a list of new ones worked until they are confirmed. For the (now) two new

Hi, The Intel UHD 730 chipset supports 4k resolution. (Max 4096x2160@60Hz). Depending on the motherboard you might not need an additional graphics card. I use a 32 inch 4K monitor. Make sure it

+ AA6YQ comments below + Understood. It's only appropriate if you don't want to wait for one DXCC award application to be processed by the ARRL's DXCC desk before generating the next one. 73, Dave,

+ AA6YQ comments below + I use a 32" HP Z32 display, whose resolution in 3840 x 2160, driven by an Nvidia GTX760. As you can see in this screenshot, it can simultaneously display SpotCollector's,

Hi Dave,

# AA6YQ comments below It would be handy if ADIF/Dave were to defined a 'P' (pending) status for those of us who prefer to manually prepare submissions as the confirmations arrive. # You can

Hi Dave, Using these instructions? https://dxlabsuite.com/dxlabwiki/UserAwardProgressreports 73 Stan KM4HQE

+ AA6YQ comments below That's ticked, Any other suggestions? + Yes: click the Colors button in the same pane and confirm that the Log Page Display background colors are set correctly. + Also visit

Thanks for reply Dave. That's ticked,? Any other suggestions? -Kurt, KR2C

I hope this is not too far off topic. I'm researching graphics cards and monitors to upgrade my shack to have more DXLabs and WSJT-X windows. My current monitor is a TV/Monitor that just does not

+ AA6YQ comments below + In the Log Page Display panel on the Configuration window's Log tab, check the "Indicate LotW & eQSL AG status" box. 73, Dave, AA6YQ