开云体育

Being a newcomer to DXLab I have to set my envelope sizes for QSL cards. I try to use normal C6 size (114x162mm), but nothing found in the list. Is there a way to add this size in the list?

Yes, I’ve been doing the cw text via cat, works well, been tweaking the macros a bit, just wondered if it would trigger the radio memories....I assume it would also do the voice memories as well....

If Commander is running and the radio accepts a CI-V command that cause it to transmit a specified "CW memory", you can setup a macro in WinWarbler that directs Commander to send the appropriate CI-V

+ AA6YQ comments below unless you use something like VPSE and split the port, which I do.... + Agreed. This a perfectly reliable use of a port splitter. 73, Dave, AA6YQ

unless you use something like VPSE and split the port, which I do....

+ AA6YQ comments below That’s not the same on a 7300. You don’t need an external circuit. I just set my 7300 up on MMTTY last week. Just needed the USB port and the EXTFSK64 DLL. Plus the right

+ AA6YQ comments below That is only the case if you use an eternal CI-V interface for CAT *or* use a third arty "port splitter" to split the RTS/DTR (PTT/FSK) and TxD/RxD lines (CI-V) to separate port

+ AA6YQ comments below against Gremlins in radio shack, I've found this on the internet: http://k9jm.com/CIV_Router/CI-V%20Router.html It would be interesting to know what do you think about this

+ AA6YQ comments below Now that I have WSJT-X directly directly connected to SpotCollector and it is working. I want my Band Activity Calls (while monitoring 6 meter MSK144 with WSJT-X) to

against Gremlins in radio shack, I've found this on the internet: http://k9jm.com/CIV_Router/CI-V%20Router.html It would be interesting to know what do you think about this gadget. 73 de Salvatore

That is only the case if you use an eternal CI-V interface for CAT *or* use a third arty "port splitter" to split the RTS/DTR (PTT/FSK) and TxD/RxD lines (CI-V) to separate port numbers. Windows will

To Simplify: I have separate WSJT-X configurations for each mode: If I change my WSJT-X configuration from MSK144 to FT8, everything decoded in X shows up in SpotCollector with network WSJTX As soon

That’s not the same on a 7300. You don’t need an external circuit. I just set my 7300 up on MMTTY last week. Just needed the USB port and the EXTFSK64 DLL. Plus the right settings in the rig. Tom

Now that I have WSJT-X directly directly connected to SpotCollector and it is working. I want my Band Activity Calls (while monitoring 6 meter MSK144 with WSJT-X) to automatically be uploaded to N6WS.

FSK RTTY in WinWarbler requires a keying circuit to connect a COM port to the FSK keying input on your rig. I built up an RS232/TTL converter that I have attached to COM2 and it is connected from a

+ AA6YQ comments below Using IC-7300, DXLab and windows 10. I am having a problem sending RTTY. When I click on start in Winwarbler I get a solid tone. + That means you don't have WinWarbler properly

Using IC-7300, DXLab and windows 10. I am having a problem sending RTTY. When I click on start in Winwarbler I get a solid tone. I also have a stand alone version of MMTTY which works perfectly. I am

+ AA6YQ comments below I only have one radio at a time power up when I am using them. The issue I have is I am using ARMY MARS software M110A, that controls transmit thru CAT control in the software.

I only have one radio at a time power up when I am using them. The issue I have is I am using ARMY MARS software M110A, that controls transmit thru CAT control in the software. For some reason I an