I did exactly as you suggested prior to my query. WW/MMTTY will not retain
my com port. It defaults to EXTFSK. I don¡¯t believe this is an MKII issue
at all.
I¡¯m using Vista 32, BTY.
Ron
From: dxlab@... [mailto:dxlab@...] On Behalf Of Joe
Subich, W4TV
Sent: Thursday, December 03, 2009 1:46 PM
To: dxlab@...
Subject: RE: [dxlab] RE: EXTFSK
EXTFSK should not be used with microHAM microKEYER, microKEYER II,
DigiKeyer or MK2R/MK2R+. Those interfaces provide a UART that is
equivalent (except or PTT timing issues) to a motherboard serial
port.
Set the "PTT" or "PTT & FSK" port on the MMTTY TX tab to the
port you have defined for FSK in microHAM Router. In addition
set WinWarbler's RTTY "modulation and transceiver mode" to FSK
LSB and select your FSK port in the FSK Control box.
73,
... Joe, W4TV
toggle quoted message
Show quoted text
-----Original Message-----
From: dxlab@... <mailto:dxlab%40yahoogroups.com>
[mailto:dxlab@... <mailto:dxlab%40yahoogroups.com> ] On
Behalf Of Ron Freeman
Sent: Thursday, December 03, 2009 1:19 PM
To: dxlab@... <mailto:dxlab%40yahoogroups.com>
Subject: [dxlab] RE: EXTFSK
I apologize if this question has been asked and answered.
I'm running FSK RTTY with a K3 and MicroHAM II. WinWarbler
(RTTY tab) does not remember my serial port but instead
indicates EXTFSK on boot-MMTTY also opens on EXTFSK. Changing
WW to my actual comport (#13) also changes MMTTY. My FSK
RTTY operates FB with Com 13 but not with EXTFSK. My other
digital modes are FB too. Do I have to live with resetting
my FSK com port each time the WW program is opened or is
there some way to get WW to memorize the com port?
73 k5mm/ron
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
__________ Information from ESET Smart Security, version of virus signature
database 4658 (20091203) __________
The message was checked by ESET Smart Security.
