For the first time, I got an error message box:
Commander: Transceiver command rejected
Set mode
29-Aug-2007 8:33:35
This happened when I put the data mode command you gave me
<xcvrcommand:FEFE66E01A0601FD> in the RTTY startup macro, changed WW
to RTTY, and then changed freq in Commander.
By the way, I assume the 0 in the macro is a zero and not the letter o?
Fred
toggle quoted message
Show quoted text
--- In dxlab@..., "Dave Bernstein" <aa6yq@...> wrote:
The correct command for placing your 746pro in Data mode is
<xcvrcommand: FEFE66E01A0601FD>
I added this to my PSK startup macro (suitably modified for my 7800's
CI-V address) and it works correctly -- whenever I switch to PSK,
Data mode is enabled.
To disable data mode, use
<xcvrcommand: FEFE66E01A0600FD>
If this doesn't get you going, Fred, please let me know...
73,
Dave, AA6YQ
--- In dxlab@..., "kg0ft1" <ffurland@> wrote:
Still doesn't work. I've put a message on the 746Pro group to see if
they can solve this.
Fred
--- In dxlab@..., "Dave Bernstein" <aa6yq@> wrote:
There should not be spaces between the hex digits:
<xcvrcommand: FEFE66E01A16FD>
(I don't have a transceiver with me and so haven't tested this
specific command)
73,
Dave, AA6YQ
--- In dxlab@..., "kg0ft1" <ffurland@> wrote:
I got WW to put the 746Pro into USB using <xcvrmode: usb>.
I can't get it into data mode, however. The manual says the
format
for
CI-V commands is -- FE FE 66 E0 Cn Sc FD.
FE FE is the preamble; 66 is the xcvr's default address; E0 is
the
controller's default address; Cn is the command number; Sc is
the
subcommand number; and FD is the ending.
The command number for send/read DATA mode is 1A. The subcommand
number is 06 -- 0=off; and 1=on.
I set it up to read -- <xcvrcommand: FE FE 66 E0 1A 16 FD>
Questions:
Did I write the xcvrcommand correctly?
Do I state the macro as <xcvrmode: usb> <xcvrcommand: FE FE 66
E0 1A
16 FD> all on one line?
Fred
--- In dxlab@..., "Dave Bernstein" <aa6yq@> wrote:
Yes. Assuming you are using WinWarbler with Commander, you
can
establish a startup macro for PSK and/or RTTY that
automatically
switches your transceiver when direct WinWarbler to begin
operating in
those modes. WinWarbler's <xcvrmode: usb> macro command will
place your
transceiver into USB mode. If the <xcvrmode> command doesn't
support
the mode you have in mind, you can use the <xcvrcommand:
hexcmd>
macro
command to send any valid CI-V command.
If you need more details, let me know...
73,
Dave, AA6YQ
--- In dxlab@..., "kg0ft1" <ffurland@> wrote:
Is there anyway to get Commander to automatically put this
rig
into
SSB
- digital mode? Instead of doing it manually? (And
forgetting
to do so
most of the time and wondering why I'm not heard? Age-
related
problem
I'm afraid.)
Fred
