Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Re: DXKeeper 1.1.6 is available
|
Dave, AA6YQ
The progress problem is a defect that was easily fixed; I'll send you a
toggle quoted message
Show quoted text
progress report file so youc an verify that this was the only problem. I noticed a lot of "truncated name" messages. With the "Import from Logger" box checked, I look for names and qths being concatenated in the name field, separated by a colon; its easy to split these and place the name and QTH in their proper fields. But there are lots of situations where the name field contains contest info, or names and QTHs without a separating colon. In DXView117, I added code to detect this condition and put the contents of the name field into the comment field (where there is plenty of room); let me know if you think this is a bad idea, or have a better suggestion. I've imported your .ADI files several times without a crash, but clearly there's a latent defect. I'll take a look at QSO# 3757 to see if it contains anything unusual, and will add instrumentation to 117 so that we can track it down. Has CI-V Commander created any error log files for you when you rapidly QSY your TenTec? 73, Dave, AA6YQ -----Original Message-----
From: Richard B Drake [mailto:rich@...] Sent: Saturday, March 24, 2001 13:32 PM To: dxlab@... Subject: RE: [dxlab] DXKeeper 1.1.6 is available Dave, The import went fine, except for the program error that occurs at QSO #3757. I found that all I have to do to recover from that is to close and reopen DXKeeper, then start the import again. The first 3757 are then duplicates and after passing those it completes normally. Performance is much improved. I'll send you the entire ADIF file (privately) so you can see that too. --- 73, Rich - W3ZJ > -----Original Message----- > From: Dave, AA6YQ [mailto:dhb@...] > Sent: Saturday, March 24, 2001 12:33 PM > To: dxlab@... > Subject: RE: [dxlab] DXKeeper 1.1.6 is available > > > That's a pretty good clue, Rich -- it implies that the > import operation is > not properly handling worked-but-not-confirmed QSOs. > I've imported my 13K > QSOs (from the first-generation DXLab, which began life > as an alternative > user interface for log files created by LOGic) and the > worked/confirmed/verified numbers match exactly, but > perhaps your logging > program does things a bit differently, ADIF not withstanding. > > Could you send me the ADIF file you're importing, or at > least a fragment > containing several worked-but-not-confirmed QSOs? > > Was the import operation reliable? How was import performance? > > 73, > > Dave, AA6YQ > -----Original Message----- > From: Richard B Drake [mailto:rich@...] > Sent: Saturday, March 24, 2001 12:17 PM > To: dxlab@... > Subject: RE: [dxlab] DXKeeper 1.1.6 is available > > > Dave, > > I am still having a problem with the Progress Table > not showing > correct results for imported log entries. I did a little more > research and found that the only entries that were > appearing in > the table were QSO's marked confirmed. The table contains all > "F's" and no "W's". All the DXCC prefixes for worked but not > confirmed countries look correct. As a test, I entered a new > country in the capture window and logged it. Indeed, > that contact > now shows up as the only "W" in the progress table. Doing a > recompute doesn't change things. I have no idea > what's going on > but maybe that's clue for you. If you like I can zip > up a copy of > my mdb file and mail it to you. > > ---- > 73, Rich - W3ZJ > > > Yahoo! Groups Sponsor > > > > To unsubscribe from this group, send an email to: > dxlab-unsubscribe@... > > > > Your use of Yahoo! Groups is subject to the Yahoo! > Terms of Service. > > > > > > > ------------------------ Yahoo! Groups Sponsor > > To unsubscribe from this group, send an email to: > dxlab-unsubscribe@... > > > > Your use of Yahoo! Groups is subject to > > > > Yahoo! Groups Sponsor To unsubscribe from this group, send an email to: dxlab-unsubscribe@... Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. |
to navigate to use esc to dismiss