If your problem is not uncontrolled common mode RFI, it is direct
RF Exposure. If direct RF Exposure is causing your problems, you
are probably in violation of part 97.13 (c). Have you performed
the calculations required to assure compliance with the regulations
referenced in 97.13(c)?
73,
... Joe, W4TV
toggle quoted message
Show quoted text
On 2025-03-04 8:44 AM, Gilbert Baron W0MN via groups.io wrote:
I put on toroids on all things that enter the PC.
I have followed many thigs to try to get good ground system .
I HAVE NO PROBLEMS WITH ANY OTHER PROGRAM BUT WINWARBLER IS USELESS ON 20m
AT > 300 Watts.
Antenna is fed with ladder line and 12 feet of the line is indoors so I
assume this is RFI. I have no problems on even higher frequencies with Coax
Fed Dipole.
I do find it strange that ONLY WinWarbler FAILS. I END UP WITH 2 COPIES
RUNNING. If I terminate ALL with Launcher it terminates only one of them
(ALL OTHER APPS DO END) and forces a Restart of PC to fix.
It looks I need a different antenna system that does not require the ladder
line feed. I can run WinWarbler with no problem on other bands and o 20 M
into dummy load.
What does anyone think? Am I stuck. I guess I could try returning to my
Older W10 Machine that had NONE of this trouble, even before spending 100
for Toroids. The Toroids did help a lot since more than WinWarbler was
failing before installing them.
Outlook LT Gil W0MN
Hierro Candente Batir de Repente
44.08226 N 92.51265 W EN34rb
