Thanks Joe,
That appears to also work.
Jim - KR9U
toggle quoted message
Show quoted text
-----Original Message-----
From:
[email protected] <
[email protected]> On Behalf Of Joe Subich, W4TV
Sent: Monday, March 3, 2025 6:02 PM
To:
[email protected]Subject: Re: [DXLab] Macros in Spotcollector
If I create a macro to send this command to the ARCluster node station
in Spot collector, it strips out the 'does not equal' "<>"
and sends instead: set/dx/filter Ctyk>
> This also affects many other commands as well. Can this be corrected?
Jim, try working from the other direction: Set/DX/Filter NOT CTY=K
73,
... Joe, W4TV
On 2025-03-03 5:36 AM, Jim - KR9U via groups.io wrote:
Hi Dave,
Many times, especially during contests, I filter spots at the DX Cluster.
One of the commands that ARCluster accepts if you want to only see
non-US spots is the command: set/dx/filter Cty<>k If I create a macro
to send this command to the ARCluster node station in Spot collector, it strips out the 'does not equal' "<>" and sends instead: set/dx/filter Ctyk This also affects many other commands as well. Can this be corrected?
Jim - KR9U
