Hi Dave,
Trying to do this, but in step 2, the check box for "Permit uploading of QSO's already uploaded to LOTW" is greyed out.
I have WSJT-X and JTAlert installed and configured.
Any thoughts?
Norman
toggle quoted message
Show quoted text
On April 4, 2020, at 9:18 PM, Dave AA6YQ <aa6yq@...> wrote:
+ AA6YQ comments below
On March 23rd I made 8 FT8 qsos. I uploaded all 8 on the 24th to the lotw site, just like I've done hundreds of other times.
2 of the qsos went to U and then to Y like they are supposed to. The other 6 are still at U as I type this. I have tried to send these 6 qsos one at a time to the lotw site by right clicking and selecting upload to lotw, but I get an error message that says it's already been uploaded to lotw.
I just checked the LOTW site and the 2 qsos that set y on lotw sent are there, but these other 6 are not.
Other than deleting the current qsos, and inputting manually, is there something else I might try?
+ LotW was having "problems" at that time. To recover,
1. in the Filter panel at the bottom of the Main window's "Log QSOs" tab, click the LoTW button; this will populate the Log Page Display with all QSOs submitted to LoTW, but not yet accepted by LoTW
2 on the "QSL Configuration" window's LoTW tab, check the "Permit uploading of QSOs already uploaded to LoTW" button
3. on the Main window's QSL tab,
3a. set the "QSL Via" panel to LoTW
3b. click the "Add All" button
3c. a small window will inform you that the Log Page Display is filtered, and ask if you want this filter removed; click the No button
3d. another small window will ask if you want to generate QSL queue entries for X Log Page Display QSOs; click the Yes button
4. click the "Upload to LoTW" button
73,
Dave, AA6YQ
