开云体育

See: https://pa0cmu.nl/drake.html#bookmark5 "Jim Harris via groups.io" <radiove1rb@...> wrote: -- 73 -Jim NU0C

Thank you Bill 73, Jim VE1RB [email protected]> wrote:

Bob, Thanks for the added info. ?When you said the amplifier went dead I thought all power to the RF deck was lost thus the filaments were not illuminated, meter lights out, status indicators out,

I got the 3296P-1-103LF (10k ohms) and 3296P-1-102LF (1K ohms). They are horizontal adjust which puts the trimmer towards the top of the radio. Just a personal preference. I haven't gotten around to

Operator preference. Use whatever way works best for you. 73 -Jim NU0C

Thanks Eric I have that info saved and have to order sometime soon. Too many irons in the fire. 73, Jim VE1RB [email protected]> wrote:

Mouser: 5 3296Y-1-103 1 3296Y-1-102 73, Bill NZ0T

Here is the thread about the multi turn pot in the TR&s.? Looks like there are some options.? I need to do this to my TR7 as well one of these day.

Does anyone have a list of the pot values otherwise I will go look them all up. Also do you have the part number to buy either from Mouser or Digikey? Thank you, 73, Jim VE1RB [email protected]>

Any other tricks I need to know?? Mount vertical or horizontal?? Horizontal seems better to me.

You, and all of us are in luck, Garry’s wife is still providing the Drake service manuals. Just visit K4OAH.com. Garry used to also provide paper copies but now it’s all downloaded. I got a 2C

You will not regret it. When I do it I measure the existing pots so I can ballpark the new ones before I do the alignment. Makes it a bit easier. "Bill NZ0T via groups.io"

Don't lose hope. They were loud on 10m a little while ago but working EU. I scored Chad for ATNO and two bands yesterday with someone else's L7. This one suffered a flashover in a Chinese 3-500z a

A golden screwdriver even less so. 73 -Jim NU0C "Mike Bryce via groups.io" <prosolar@...> wrote:

Yes his xyl still sells the files but not CD’s. The info in his web site is good. Just send an email 73, Jim VE1RB [email protected]> wrote:

I just ordered 10 turn pots for the power supply board from Mouser.? Seems that if I just look at the damn things they change so a bit over $35 shipped will be well worth it IMO. 73, Bill NZ0T

Hi, I wanted to purchase the Drake 2-B info from K4OAH, but I found that he's an SK. RIP,? Garey. Did anyone continue on supplying Garey's Drake rig information? 73, Larry? K3PEG

Both of the Parasitic Choke resistors were kind of burnt. That may be because of parasitics as C39 and 40 were the blown capacitors. I don't think the breakers blew as it seems when the caps went I

Peter Thanks for the info, ok on it being for the RR1 RR2. Great picture of the LN4 in the RR1. Sure don't remember seeing anything like that. I was not that familiar with their marine line products

Must have been the same old tech that told me, “A screwdriver will never fix a broken radio.” Mike, WB8VGE SunLight Energy Systems The Heathkit Shop http://www.theheathkitshop.com/ J e e p