开云体育

Good to hear you got it sussed, Bill! Yeah, Drake (and many manufacturers) long ago decided on, what it to me and a lot of people who operate CW, a very high frequency offset. Unfortunately, there's

GM Gary, I ran some test with the set up and it works very well.? Thank You Bill N3WM

Gary, Thank you for your response...I really appreciate it. I will give it a try this morning..? you can't beat this Drake group for assistance. I love the Drake gear but I gotta wonder why they went

Bill, The simple way is to leave your R-4C ON (as opposed to EXT MUTE).? Turn down the sidetone. Set Tx to CW, Rx to LSB. Hit the key.? You now hear your exact transmitted signal.? Note the tone,

Gentlemen, I have a classic T4XC & R4C set up that I could use some advice with operating CW. Has anyone written a procedure to set them up for CW operation? I have read the paragraph in the T4XC

OK, 90 watts is typical for 10m unless it has been repaired with more modern transistors. Sounds like you are on the right track. Don't feel too bad, I have a Yaesu FT707 on the bench that has been

Hehe... Hi Jim, Yes, I did re-adjust the Pre-Driver gain pot. And the driver bias is there when in Tx. The voltages are strange and about a possible out of band oscillation on 10m, when I connected

Drakers, I need a little help.? I misplaced the manual for my TR-6 and I need the part number for the 300 Hz CW filter. I tried on-line, however the manual. that I found listed the availability of

Here's a good site... http://www.ea1ddo.es/drake.html -- 73, Kevin, K8KVN

Even quicker, a simple Google search will turn up a plethora of manual sources of varying quality. Some free, others not. 73 -Jim NU0C "Matthew VE3MXG" <ve3mxg@...> wrote: -- 73 -Jim NU0C

I guess I should have avoided confusion on my original post. The memory of possibly fixing the issue before with a hayseed capacitor can was on a different set of twins. I honestly don't remember for

Good Morning Everyone, Thank you very much for the quick replies.? They were very helpful! 73 VE3MXG Matt

Shure 444 Desk Microphone (High Impedance) User Guide https://pubs.shure.com/view/guide/444/en-US.pdf Original cable (70A253) was 2-conductor (black and white) shielded with plastic outer jacket, 7

Thanks everyone. -- 73 John?N4YE

Matt, Have a look at http://www.wb4hfn.com/DRAKE/DrakePageHome.htm a very comprehensive site also containing a lot pf manuals. 73 de Rob PA9Z

Oh boy, what an enthusiasm ? Well, the culprit was a resistor of 270 Ohms connected to R59 (to the upper lead in the schematic) and the chassis. Hence pulling down the voltage of a.o. the cathode

Gary, Thank you. Chuck

About 10 dB gain, or 10 to 50 watts. Gary W0DVN

Hello to the group How much output power does the L-4B? or L7 produce with QRP (1-5 watts) input on all bands using good tubes. Thanks. Chuck

Matt, I fully agree with Richard. I ordered these CDs for download last week as well and it sped up the problem finding in my T-4XC. Send a mail to Carol (Garey K0OAH's XYL) and she will instruct how