开云体育

I am interested What do you think shipping would be? Perhaps if I knew the dims and weight I could send a shipping label? Marty KL7AM To: "DRAKE-RADIO" <[email protected]> Sent: Monday, May 8,

I have two TR-7 parts radios for sale. S/N 2794 is complete but inoperative; some previous owner unsuccessfully attempted repairs. It is missing a few knobs and also needs a serious cleaning.? S/N

HI Ralph, I don’t have an accessible manual for some one who is blind to use that tuner, so I’ve been tuning for maximum noise, and using my audible tuning aid, a TW-1 made by LDG to try and get

Are you following the Drake tuning instructions ?? That tuner tunes up much different than most of the others that use a PI type network. First time I tried to tune one I could not get it to match

folks, I’ve been trying to use my MN-2000 with my off-center fed dipole, and my Parr end-fed antenna on the lower bands to tune up on 80 meters, and I notice that it’s a challenge to get a 1:1

All put back together and tested on my TR7 station without and with an amplifier. Seems to work perfect and meter tracks with my WH7 and MN 2700 fine. Seems like I got it at a good price and it works.

I just shake my head...... *http://www.k4oah.com/Drake_new11/index.html From this site: * *And open a case with PayPal. * Still shaking my head in wonder... Jim W7RY -- Thanks and 73, Jim W7RY

2 Months ago, I sent 25 dollars, via PayPal, to K4OAH's sales site for a set of 'C' cd's. via download. I have heard nothing from whomever administers to sales. Can anyone here direct me to a good

Notice: I have decided to turn over my supply of TR7 connectors, cable and crimp tool to Steve WA4F. Except for one local Colorado ham who may come by my house this week, Steve will supply these items

Thanks, Johni was going to do the calculations but it’s not easy when in the passenger seat of a moving car. :-) I figure that it took 61 years for the part to drift that far, so any corrections

If you can shunt your pot (fixed end to fixed end) with a made-up series combination of fixed resistors that yields about 35 megohms, you'lll be able to bring your 26 meg pot down to 15 megs. 73 de

Bob: Glad you got it out. The MN-2000 and MN-4 can be a bear to remove from the cabinet. Same with the C-4 console, especially if someone has replaced the inner cover screws with round head screws, or

It could, if you use a large piece. Steve Wedge, W1ES/4 Time flies like an arrow. Fruit flies like a banana. Sent from Proton Mail for iOS

Bob's correct. It's supposed to be laying against that metal coupling on the shaft. Probably has lost its spring over time. Mark, WB0IQK

Hi Gary, Does the paper on top of the finals affect their cooling? 73's Jim KD0WF

And yes it is built like a sherman tank

Well after a lot of trials and errors, I found that whomever placed it back in the cover put it on with the 4 outside screws for the case already installed. This is what was making it very difficult

Ah, that's where everyone was. I was hoping for a critical audio report on a "new to me," TR4-CW-RIT that followed me home. I also have no VOX on SSB and no delay on CW regardless of how the VOX

Steve's technique is the same I used to whiteline literally hundreds of R390A knobs. With Drake knobs, a trip to the hardware store for some "Blue Magic" polishing compound and a 30 seconds on a

Jerry, It depends on propagation. ?We've had checkins (not today) from Florida, Texas, Oklahoma, Minnesota, Michigan, Maine, Delaware, etc. but propagation holds all the cards. ?The time does not