开云体育

For sure Peter!!? Thanks for the correction.? I worded that wrong. I'll contact Paul and ask for some guidance on that. I do have alternatives now to this unit but I don't want to part it out

The subject says it all: what did Drake change when they went from the T4X and the T4XB? Was there a T4XA? -- Richard Loken VE6BSV : "...underneath those tuques we wear, Athabasca, Alberta Canada :

Yes, with both Fixed Feq buttopns out. RB

Hi Rick Do you have the pushbutton in the TUNE position? When I do (and with both fixed freq buttons OUT) the tuning on my RV75 is slower than the TR7 itself....I'd say maybe 10 degrees of knob motion

Greg, Thanks for your detaioled reply. I did find what looks like to correct connector on eBay. Rick K8EZB

I began checking out a new-to-me RV75 this AM and am seeing some issues I dont yet understand. These are: 1. While the RV75 seems to be working in a basic fashion, the frequency displayed on the TR7

Hi Folks, Can anyone here write back and tell me the height of TR7 boards.? I am building sets of extender boards and need that dimension. Also, if there are technicians here willing to test my

Peter: First...a small correction...not *THE *previous owner...but *A *previous owner. Contact Paul Kramer, K0UYA, for his picture set on how he replaced that switch with a stripped down multiple

Rob, Thanks for sharing your insights on this. What I think you are saying is that AGC attack distortion is a “feature” of some of the designs in the receivers by Collins and Drake, and that this

There is a company on the east coast of ?the US that rebuilds switches. ? Not cheap though. ? Can't ?recall the name of the company.

Thanks Gregory. ?Without a pic, hard to know what a vendor is selling.

Hello to all.? It's been a minute since posting here but I keep up to date on what's up just the same.? Always interesting and informative.? This spring will be Delhi tower antenna erection, and

You can detune using a clip-lead jumper. Much safer and stable. Steve Wedge, W1ES/4 Time flies like an arrow. Fruit flies like a banana. Sent from Proton Mail for iOS

I found that the majority of problems was with the connectors on the mother board. Pull all boards and clean the connectors, dry joints were also a problem on both the mother board and the individual

As noted by Garey Barrell, K4OAH (2015), the Switchcraft 3502 is a great RCA connector, with a variety of finishes (chrome to matte black) https://www.switchcraft.com/assets/1/27/rca_plugs.pdf?7073

Cinch Jones 300-series plugs https://www.mouser.com/datasheet/2/643/ds_CCS_IND_jones_plugs_300_series-1358563.pdf Drake TR-7 transceiver (Rear Panel) has an 8-position Cinch Jones connector (308) for

Evan, K9SQG was the NCS for today's Drake Technical net on 7.238. He had 39 check-ins under good band conditions. Here are the radio's that were used to check-in. B Line 5 C Line 3 TR3 2 TR4 12 TR5 4

See: /g/DRAKE-RADIO/message/50555 73 -Jim NU0C "Doug Crompton WA3DSP" <wa3dsp@...> wrote:

Curious if Drake supplied RCA cables to connect the twins together. I count 6 sets. I have plenty of RCA cables from years of audio and video connections but I want to make a nice set specifically for