Re: Need help installing Sherwood product detector
Has anyone done something like this with an early TR7 product detector? I'm aware of the MC1496 mod, just considering an alternative. 73 -Jim NU0C "Rob Sherwood" <rob@...> wrote:
By
Jim Shorney
·
#69527
·
|
Re: R-4C 17m xtal
https://yhst-172765969-1.stores.yahoo.net/drake-4line-crystal--hc6u-hold46.html Jim W7RY
By
Jim W7RY <jimw7ry@...>
·
#69526
·
|
Re: R-4C 17m xtal
AF4K Crystals has ANY Drake crystal you could need in stock on their web site. Look em up. 73, Jim W7RY -- Thanks and 73, Jim W7RY
By
Jim W7RY <jimw7ry@...>
·
#69525
·
|
Re: Low Capacity Injection Cables
RG-174 is 1/8 inch diameter, very flexible, easy to install onto phono plug, and capacitance is 30.8 pf per foot according to Belden spec sheet. Chuck N0CW
By
Chuck N0CW
·
#69524
·
|
Re: Low Capacity Injection Cables
Additional note: All of the patch cables I use on C Line twins are made of this cable and operation has been great. Have made over 5000 SKCC QSOs in the past two years with this gear along with plenty
By
Chuck N0CW
·
#69523
·
|
Well-equipped R-4C For Sale
I have been selling off some Drake equipment for a friend of mine who hasn¡¯t used any of his Drake stuff in years. When I get them in, I put them on the bench, clean switches and contacts, perform
By
Steve Wedge, W1ES/4
·
#69522
·
|
Re: R-4C 17m xtal
I have an assortment of HC-6/U R-4C crystals for non-ham band frequencies. If anyone is interested drop me an email direct to rob@...<mailto:rob@...> $25 + mailing. Sent: Friday, February
By
Rob Sherwood
·
#69521
·
|
Re: R-4C 17m xtal
Brian Carrick writes: Oh good grief! Why didn't that show up in any of my searches? :-P Thanks for the pointer. I'll soon have the whole set :-) --lyndon
By
Lyndon Nerenberg (VE7TFX/VE6BBM) <lyndon@...>
·
#69520
·
|
Re: R-4C 17m xtal
I have a few in that type of holder. 25.6 25.0 24.5 In Megs. Also 10.0 m 4.5 m 4.915 m 11.0 m Cheers Cliff
By
Cliff Hine <Fofield@...>
·
#69519
·
|
Re: Need help installing Sherwood product detector
Here is what I have on installing my Gilbert Cell product detector in an R-4B. Rob, NC0B Sent: Friday, February 10, 2023 10:40 AM To: [email protected] Subject: Re: [DRAKE-RADIO] Need help
By
Rob Sherwood
·
#69518
·
|
Re: R-4C 17m xtal
18.0 MHz + 11.1 MHz. 11.1 MHz higher than the lower edge of a band. Rob, NC0B Sent: Friday, February 10, 2023 11:44 AM To: [email protected] Subject: Re: [DRAKE-RADIO] R-4C 17m xtal Do you know
By
Rob Sherwood
·
#69517
·
|
Re: Need help installing Sherwood product detector
Hi Evan, I think one. I get a spam report every morning from the previous day. Rob Sent: Friday, February 10, 2023 12:10 PM To: [email protected] Subject: Re: [DRAKE-RADIO] Need help installing
By
Rob Sherwood
·
#69516
·
|
Re: R-4C 17m xtal
Here is one on eBay. . . Check out 29.1 18.0-18.5 MHZ 17 METER HAM BAND CRYSTAL FOR DRAKE R4 R-4A R4-B R4-C on eBay! https://www.ebay.com/itm/354567544384 [email protected]> wrote:
By
Brian Carrick
·
#69515
·
|
Re: Need help installing Sherwood product detector
Rob, Have you gotten any ?of my recent emails or could they be automatically be going into a spam folder or someplace? 73, Evan, K9SQG
By
Evan
·
#69514
·
|
Re: R-4C 17m xtal
You can try Nationwide Radio. Always has a good selection. Great to deal with too
By
william pinkava
·
#69513
·
|
Re: R-4C 17m xtal
Do you know the xtal freq offhand? [email protected]> wrote:
By
Cliff Hine <Fofield@...>
·
#69512
·
|
Re: R-4C 17m xtal
Know the crystal freq offhand?
By
Cliff Hine <Fofield@...>
·
#69511
·
|
Re: R-4C 17m xtal
Here is a link to a seller on eBay that might be able to help you. I have it You need it Store | eBay Stores ( https://www.ebay.com/str/ihaveityouneeditstore )
By
K6OXN Bob
·
#69510
·
|
R-4C 17m xtal
Filling in the WARC bands I've found xtals for 30m and 12m, but I'm not having any luck tracking one down for 17m. Anybody have a pointer to where I might find one? Thanks, --lyndon
By
Lyndon Nerenberg (VE7TFX/VE6BBM) <lyndon@...>
·
#69509
·
|
Re: Low Capacity Injection Cables
Reading the article we need something that is flexible and low in capacitance and try for a total of 60pf in the cable. Here is something that might work quite well.
By
Michael W1NR
·
#69508
·
|