开云体育

Marc; #12 bulbs are available in lots of places still.? Here's one; https://www.amazon.com/12-Miniature-Light-Bulb-Pack/dp/B00BQGKFFM 73 Peter VE7PS

I just got finished troubleshooting a TR4 and found the #12 fuse bulb open. I can return the rig to service by shorting the socket, but ideally I would like to replace the fuse. Is there a suitable

Gentlemen: Thanks for your comments and suggestions. I bought a BHI noise away, but it appears to have been reworked, and the power-connection broke ( diode cracked). I'm hesitant to try that brand

KNB2_KNB2 K2 Noise Blanker Option?×?1 Dave and Elecraft K2 Customer Support After installation remarks for the Elecraft KNB2 Noise Blanker in my Elecraft K2.? November 1, 2020? ?1300Z? 7.03000

Not only played with it, we made it! We would heat cinnabar in a distilling flask and get liquid mercury. We would put it in little vials with cork stoppers and take it to school and play with it. No

I've finally run out of shelf space in the shack and am considering selling my TR4CW/RIT station to make room for something new. I am keeping my B-Line though.? The transceiver is in what I would

You're not the first person I've heard that from. We were smart enough to not actually EAT it. 73 -Jim NU0C "Bob Novas via groups.io" <bob.novas@...> wrote:

You probably played with mercury as a kid, right? I did too. 73 Bob, W3DK

Not surprising at all, Joe. I have to deal with the nasty stuff at my day job. Good old 63/37 truly is the best tool for the job. 73 -Jim NU0C "Joe Wolfe" <w7rkn.7@...> wrote:

Thanks to everyone for their thoughts and suggestions. I will definitely keep looking around and check out the specific sellers that were suggested. I have an aversion to ePay unless I already know

I definitely recommend taking a look at 'goKimco.com'.? They are an older (started in 1978) industrial distributor of soldering and soldering supplies located in Mentor, Ohio. They have all the best

I absolutely will not use no lead solder on any work I do. 80% of the dead Ameritron amplifiers are caused by no lead solder. I'll spend an hour or two reflowing solder with leaded solder and the

I'm just the opposite, I have 63/37 but keep lead free for when absolutely necessary. Like many others I got a supply when a local manufacturer changed over. Look around, you will find some. For

Looking at an old spool from Alpha Metals, Inc.? 60 / 37.5 / 2.5Jim - WB6TNF

I still have a couple rolls from DEC :-) Steve Wedge, W1ES/4 Time flies like an arrow. Fruit flies like a banana. Sent from ProtonMail for iOS

I ?was able to buy an ?old roll of solder with lead 5-6 years ago from a vendor on eBay. ?It was a necessity. ?Why? ?The soldering of a TCXO into my Kenwood TS-590S was virtually impossible with

I was lucky. Went to electronics manufacturing plant's closing auction with a friend. One of the items was 3 cases of rosin core solder. 40/60 ,.125, I think it was, small stuff. I put in a bid for

Martin: I'd have to agree with Bill, though in my case I have yet to use Craig's List or Kijiji, at least for solder,? but I have found my lifetime supply of various sizes of Kester solder rolls

I wish fun stuff like that showed up on our local Craigslist... Thanks, Barry - N4BUQ

Hello???? I was out of my better solder and needed more of what made soldering fun again. I found KESTER? 63 / 37 1#? on e-bay for about $22.00 at a seller in Ohio that was in March.