开云体育

So what smokes these things anyway? Lightning? Or is it a problem in the design to be resistive at high potentials? I don’t see any soot, which you’d expect from a lightning strike. But it was hot

Maybe Modutec made the meter. 73, Jim VE1RB [email protected]> wrote:

Best wishes to you, Mike, for a solid recovery. 73, George K4GM

Patrick: A while back Paul Kraemer, K0UYA, posted some pics that I believe are posted on this group that shows a repair job he did on that switch using a 5 position, 5 or 6 pole switch from Russia

That looks like a Centralab wafer. You might find a single replacement wafer on eBay or other sources. They're still made by Electroswitch. Thanks, Barry - N4BUQ

Here are some pics (if this will work from my phone).... Patrick NG7I

Also, the front ceramic standoff for the right variable cap has cracked so I’m going to need one of those too. Patrick NG7I

Was doing a quick recap after restoring this Drake L75 Amp.: 1- the two RCA connectors on the back of the unit (Vox Relay and Transmitter AGC) are too close together for comfort! ?I made the cable to

Gentlemen, I got an MN-2000 tuner off eBay last month and finally had time to test it.? The knob in the upper left ( Alternate / Match 1 / Match 2 / Direct 1 / Direct 2 ) was seized so upon further

Steve: I have made numerous attempts to keep up a spreadsheet with model/mfg serial #/options/ condition and a suggested worth.? The trouble was trying to keep it up as gear was bought and (some)

[ www.hamestate.com ]( http://www.hamestate.com ) I am a "Life" member. I do not want to burden my XYL any further when its time to deal with my stuff. I have personally met the folks at HamEstate

I’ll make a list of my gear and fair market value. Leave instructions for my wife to email this group any get in touch with my local radio club to help with moving it to a good home. Brian Smith

I am also sometimes worried about that subject. No one at home follows my steps and, in YS, we have no hams. All are dying, and we are no more than 6 hardcore ones who still do DX. The rest only work

Agree! Ditto. Too fast Bob. Kq2q

I’ve been lurching into the creation of a spreadsheet so that my XYL has something to start with if I suddenly depart. I do need to include tools. I’ve sold about 70% of my coins already.

Indeed!? Dealing exactly with that issue this past week with my neighbour. He had two working homebrew all band HF amps - not really up to snuff with appearance per my requirements, but chock full of

“We’re gettin’ old and we’re gonna die, do dah, do dah.” — Steve, W?PZ -- Steve? W0PZ

We're all getting older. Before we sign Happy Trails and ride off into the sunset, it's time for some estate planning so the stuff we worked so hard to hoard doesn't end up in a land fill. -- "I am a

Hang in there Nike.? Do what the Docs tell you and recover well. -- Mike Stover N9QR Fort Wayne, IN N9QR@...

Yes, I will be careful not to switch bands while tuning. Also forgot to mention: - I protected the meter with two diodes back to back the same way ?I did with the old Collins 30L-1. - Added soft