开云体育

I agree with every word of this. I don't know when eBay had their last rate hike, but I just sold a Kenwood TM-V71A about 2 weeks ago. It brought $485 +$18 shipping for $503. I'll clear about $423 of

Lyndon VE7TFX writes: Umm ... make that China. --lyndon

John K5MO writes: Anything I buy from Japan lands on my doorstep in Vancouver within 10 days or so of it being shipped: Alinco DR-235 11 days Free Kenwood TS-600 11 days 76.67 Kenwood TS-700 7 days

The wafer I found was NOT from the same manufacturer but it ended up working fine. There was a lot of standardization (also called "copying") of design when these were made. Lots of choices.

This is where it's good to (re-) mention PirateShip, where you can save big bucks (50%?) over counter rates for the big shippers. USPS discounts are pretty hefty too. No idea if they offer

Stephen G7VFY via groups.io writes: Thanks, but i already have a C-line :-) --lyndon

Know exactly what you're talking about.? Made a mistake shipping sheet of Lee Filter? for my tr7s and r7s from California . Had it shipped Ebay global by mistake. I always ship to Washington state.

Good for you. My Drake TR44C and I are in the UK. Merry Xmas Stephen WaltersProfessional Celebrity Photographer / G7VFYwww.facebook.com/mister35mm Tel 07956-544202

Ebay Global Shipping would be a laugh riot if it wasn't so pathetic. I regularly receive items from Asia and eastern Europe is half the time it takes something to travel here from Washington state (a

Ebay is crawling with 250K and 500K CTS potentiometers. Apparently, they're used in electric guitars. - Jerry, KF6VB

You usually need to use slip joint pliers to put the pin back. You needed a fair bit of pull to get it out and you need a fair bit of push to put it back. Clint, VE3CMQ Sent: Friday, 8 December 2023

If for some reason I cannot return the pin holding the cap onto a Jones connector, I just push some hook up wire through the cap and the connector hole and then bend over the outside edges. Looks a

Hi, Question. What differences are there in the Drake L4 vs the L4B that may negate or change the installation of the ES4L-4B v1.0 (

Dear Sir, I don't know when you last tried to post anything to another country, but I suspect that you have not, for a VERY long time. Anything over 2kg in weight gets VERY expensive. Especially if

EBAY Global shipping opens every package to inspect, and then repackages it, poorly. I won’t purchase anything on EBAY where the seller is using GPS. I have had too much damaged equipment. AND, it

Well, I spoke a little soon about the condition of these potentiometers. ?I cleaned them with Deoxit Fader F5, pressurized can with nozzle following instructions, yesterday. ?I thought I’d check

I recently bought a used TR-4C AF/RF/SPST assembly for a spare. ?It was in good mechanical condition and cleaned up nicely, but the 500 kohm pot is noisy, and the 10 kohm pot measures a constant 1

The price is highly dependent on the origin's options and which options are known to the seller. Steve Wedge, W1ES/4 Time flies like an arrow. Fruit flies like a banana. Sent with [Proton

Yeah, it took me a few cycles to figure that out. Those of us with manufacturing or field tech backgrounds were probably scratching our heads. It's all good. We all come from different origins. I have

P.S. I should have mentioned that there’s little pressure from the cutter against the pin to ruin the cutters. The cutters are used to lift, not cut. The only pressure applied to the side of the pin