¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: PTO makes scraping sound


 

Mark:

Looking at my early K4OAH Service Manual, there is a pic of the RIT Control Board which shows the RIT CONTROL? wire as a GREEN wire and is connected as shown in the pic below.? ?There isn't a specific pic of the TR-4CW/rit PTO OUTPUT connection in my version of Garey's service?manual, but the TR-4C PTO Output goes to "Board 1" and is a WHITE wire.? Board 1 is on the front left with the radio upside down and facing you.? I cannot be absolutely sure that the PTO OUTPUT goes to the same place in the TR-4CW/rit until I check my own radio next week, though I suspect it does, but if you took pics prior to?PTO removal, that should confirm it for you one way or the other.

Pics below show the?kind of things you get with the K4OAH Service Manuals.? I highly recommend ordering these for the radios you have as they sure make things easier to find in the 4-line radios.? Though Garey sadly became a SK in 2018, his family still sells them at K4OAH.com.

73
Peter
VE7PS
37f5288d-1444-4339-9101-41b5c4f3f159.png


image.png


On Thu, Apr 3, 2025 at 8:58?AM Mark N2DMI via <markkiziuk1=[email protected]> wrote:
Hi Peter, yes I took photos of EVERYTHING that got connected to the PTO. On the PTO output (which is the green wire) it goes to a small board. Where on the schematic is that going to??
Mark

Join [email protected] to automatically receive all group messages.