Got the solid state relay in my L4B this past week. Got her on the bench with my TR4C this morning. All cabled up
When I key the xcvr in cw the amp shows no power output. Plate current abou 100ma but can¡¯t be dipped and NO GRID current. It has HV
I suspect the relay but wanted opinions first
Yesterday when I hooked the xcvr to it there was no pass through. I cleaned the contacts on the relay and got RX through it now. i cleaned the N/O contact for rf in and out also.
But maybe the relay is bad? I cannot hear it pic
Will take bottom off soon and see if it actually picks when I key it
Ron W5sum
Ronnie Hull - W5SUM