Just finished the full alignment.? All frequencies and voltages look great. The only problem is that when tuning, I cannot get the 100hz digit on the TR7 to increment and then it will advance by 1khz.? Annoying at least but the 10x probe proved to be the main culprit.? Now to set down with the schematic and see where I went wrong with the tuning so that the 100hz digit increments correctly. I use my RV-7 and it increments properly with it, so the TR7 is working as it should. I suspect that one of the signal voltage adjustments is wrong or on the edge. It will work out and I enjoy a good challenge.? RV-75 looks good and it is right on freq with WWV and some of the nets I get on.? I still suspect L211 and L212 is the problem although the signal is right at spec.? Thanks everyone for the hints and assistance.
73? Bob
