Both.? I have listened on a couple different radios I have and have seen the signal on the waterfall on those radios.? I have also gotten a report back from another Ham who said there was to much RFI(noise) that he could hear me but it was so noisy.? When I key the mic in SSB the signal(on my other radios looks good but when I apply any audio the signal spreads out across both sides of the carrier(which isn't there for SSB) but looks almost the same as transmitting on AM.? Which again when I switch over to transmit in AM it sounds good.? The distortion sounds (I know not technical) like when you are tuning in a signal and you go from the high pitch past the good signal to the lower pitch.? I have run it through a manual tuner Drake RC-4 and through an automatic antenna tuner.? It is also the same if I run it into a dummy load or into an antenna.? I have read through the manuals and have watched some videos on YouTube and seem to be doing everything correctly.? ?Again, I'm hoping it is something simple that I'm missing.? Thanks for the help. Mark?? On Mon, Feb 19, 2024 at 7:34?PM Steve Wedge, W1ES/4 via <w1es=[email protected]> wrote:
--
Mark "Fleisch" Fleischer KF?KZP Public Address Announcer/Voice Over/Production Specialist:? ,?,?, ,?,?,?(Superior), and?(Proctor) |