Re: Another TR7 Journey begins
|
Bill,
I'm sure some of the experts will respond with some great procedures. ?Try the Drake Net (7238 at 44 PM Eastern on Sundays) for some info as well.
What I have done in the past is to remove the digital display board first, and then one at a time removing and cleaning the edge connectors on each board. ?I use DeOxit as a cleaner and after applying it sparingly, I wipe off the excess, let it dry, before reinserting in carefully. ?Then I let things "dry" for 24 hours before applying power. ?Sparingly applying DeOxit to switches and pots is a good idea too.
73,
Evan, K9SQG
On Thursday, February 8, 2024 at 10:36:48 PM EST, Bill NZ0T <nz0tham@...> wrote:
Could somebody please point me towards a prodcedure for removing and cleaning the circuit boards?? I assume I will need to removw the display board to get to all the boards so I need to know how to do that too.? I have spent about an hour looking around on the internet and haven't found what I need yet and there is nothing in the service manual.
73, Bill NZ0T
|
